XigmaNAS 11.2.0.4.6229 released (FreeBSD 11.2-RELEASE-P5)

[zoon01]

We are pleased to announce the release of XigmaNAS version 11.2.0.4.6229 - Omnius.

First BACKUP your current Configuration!
READ readme_11.2.txt please before you do anything!

Download build 11.2.0.4.6229

Changes after release 11.2.0.4.6195
======================
- Upgrade FreeBSD 11.2-RELEASE to P5.
- WebGUI code & framework improvements.
- Update translations.
- Add L2ARC size statistics to RRDGraph.
- Use upstream code for novnc.
- Upgrade mariadb to 10.2.19.
- Upgrade sudo to 1.8.26.
- Upgrade APCu to 5.1.14.
- Upgrade samba to 4.8.7.
- Upgrade virtualbox-ose to 5.2.22.
- Upgrade lighttpd to 1.4.52.

Basic Note:
- Make a new backup of your system configuration and store this on safe location, the system config.xml could be upgraded!
- Clear your browser's cache to avoid display issues after upgrade when coming from older release.

Regards,
Team XigmaNAS

[doktornotor]

Works great, the L2ARC stats working as well.

[Victek]

Thanks to developers, updated and working in my configuration without issues.

[doktornotor]

Some cosmetics needed here to get rid of the unwanted HTML entity:

Screenshot_status_disk.png

[zoon01]

Some cosmetics needed here to get rid of the unwanted HTML entity:

Thanks for the report, cosmetic issue now fixed in svn.

[doktornotor]

Thanks as well.

[ExTruckie]

Installed update and everything is ok at this time.

[netware5]

Hi, I see upgrade of virtualbox-ose to 5.2.22 appeared again. Does that mean the VNC issue has been fixed upstream in FreeBSD?

[zoon01]

Hi, I see upgrade of virtualbox-ose to 5.2.22 appeared again. Does that mean the VNC issue has been fixed upstream in FreeBSD?

We applied the patch before it was upstream fixed on FreeBSD ports so yes, novnc is of course working in this release!

[Shperrung]

Hi
Is it possible to add a support for NICs with 1000baseT "media" mode in next releases? Cheap onboard LAN adapters doesn't have 1000baseTX and 1000baseTS mode. There is only compatible 100baseTX in Network > LAN Management > Advansed Settings.
Thank you!

[doktornotor]

Hi
Is it possible to add a support for NICs with 1000baseT "media" mode in next releases? Cheap onboard LAN adapters doesn't have 1000baseTX and 1000baseTS mode.

Eh. Any gigabit-capable NIC hardware must support autonegotiation per 802.3 specs. If yours does not, I'd strongly suggest to return the broken HW to the seller.

[BodgeIT]

A UI change may be required in HDD Format

xigmanas.jpg

Surely it has to be one or the other?

[raulfg3]

A UI change may be required in HDD Format
xigmanas.jpg
Surely it has to be one or the other?

yes, must be changed to " Not Erase MBR"

[barman]

Since this release, I get the following messages in the log:
smbd[2153]: inotify_rm_watch returned Invalid argument
smbd[2153]: [2018/12/13 21:26:28.106399, 1] ../source3/smbd/notify_inotify.c:369(watch_destructor)

Does anybody know what they mean?

[anton_mn]

Can't boot after upgrade (even from installation usb)
MB: gigabyte ga-j1800n-d2h

[raulfg3]

Can't boot after upgrade (even from installation usb)
MB: gigabyte ga-j1800n-d2h

not enough info to help you, common suggest are:


Do you try a fresh install?.
Do you try different boot options MBR/GPT/ZFS UEFI on XigmaNAS install shell?

etc...

[anton_mn]

Can't boot after upgrade (even from installation usb)
MB: gigabyte ga-j1800n-d2h

not enough info to help you, common suggest are:


Do you try a fresh install?.
Do you try different boot options MBR/GPT/ZFS UEFI on XigmaNAS install shell?

etc...

I try to do "fresh install" , but it hangs at the same place (first menu with boot options). Result is the same.

[raulfg3]

revise Gigabyte BIOS Options and remember that you can do the fresh install on otrher machine and then move boot device to your motherboard and MUST boot & work.

My sugest is that use ZFSonRoot install to easy updates from webGUI.

[anton_mn]

revise Gigabyte BIOS Options and remember that you can do the fresh install on otrher machine and then move boot device to your motherboard and MUST boot & work.

My sugest is that use ZFSonRoot install to easy updates from webGUI.

I try different boot options but no result

[raulfg3]

do you try to install on other machine and then move the boot disk to your motherboard?.

[anton_mn]

do you try to install on other machine and then move the boot disk to your motherboard?.

No, but I think it shouldn’t work because installer image can’t boot too.


Отправлено с моего iPhone используя Tapatalk

[anton_mn]

do you try to install on other machine and then move the boot disk to your motherboard?.

Did, but can’t boot.


Отправлено с моего iPhone используя Tapatalk

[raulfg3]

sorry no more ideas, is strange that boot before update and not with new.

[anton_mn]

sorry no more ideas, is strange that boot before update and not with new.

True


Отправлено с моего iPhone используя Tapatalk

[anton_mn]

sorry no more ideas, is strange that boot before update and not with new.

I guess that problem with FreeBSD boot loader or loader parameters.


Отправлено с моего iPhone используя Tapatalk

[anton_mn]

When the next version of XigmaNAS will come?)


Отправлено с моего iPhone используя Tapatalk

[Shperrung]

Hi
Is it possible to add a support for NICs with 1000baseT "media" mode in next releases? Cheap onboard LAN adapters doesn't have 1000baseTX and 1000baseTS mode. There is only compatible 100baseTX in Network > LAN Management > Advansed Settings.
Thank you!

[RESOLVED]
I been cack-handed when crimped cable. 2 wires were crossed-over and router NIC recognized just 2 pairs. Xigmanas see my "gigabit" Realtek NIC as appropriate.

Code: Select all

[  5] local 192.168.1.4 port 5201 connected to 192.168.1.172 port 55944
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  66.7 MBytes   560 Mbits/sec
[  5]   1.00-2.00   sec  94.7 MBytes   794 Mbits/sec
[  5]   2.00-3.00   sec  94.0 MBytes   789 Mbits/sec
[  5]   3.00-4.00   sec  88.9 MBytes   746 Mbits/sec
[  5]   4.00-5.00   sec  93.9 MBytes   787 Mbits/sec
[  5]   5.00-6.00   sec  80.4 MBytes   674 Mbits/sec
[  5]   6.00-7.00   sec  88.5 MBytes   742 Mbits/sec
[  5]   7.00-8.00   sec  82.5 MBytes   692 Mbits/sec
[  5]   8.00-9.00   sec  90.7 MBytes   761 Mbits/sec
[  5]   9.00-10.00  sec   104 MBytes   876 Mbits/sec
[  5]  10.00-10.00  sec  70.6 KBytes   894 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.00  sec   885 MBytes   742 Mbits/sec                  receiver