Hello,
I have this error when i would like activate bitTorent service.
Error: The changes could not be applied (error code 1).
I have make changes in différent parameters in the interface but all changes had the same result.
I make those parameters in folders:
Chown -R transmission: transmission
chmod 777 /data/torrents
chmod 777 /data/downoald
chmod 777 /data/unfinished
I use this version
9.1.0.1 - Sandstorm (revision 344)
Thanks a lot for your help
Mohamed
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Error: The changes could not be applied (error code 1).
-
mboutahri
- NewUser

- Posts: 2
- Joined: 11 Oct 2012 21:01
- Status: Offline
Error: The changes could not be applied (error code 1).
You do not have the required permissions to view the files attached to this post.
-
russian
- Starter

- Posts: 60
- Joined: 27 Jul 2012 08:11
- Location: Russia
- Status: Offline
Re: Error: The changes could not be applied (error code 1).
Try to fill the "configuration directory" field.
Nas4Free x64 9.2.0.1 rev.972; case: Lian Li PC Q08b; mb: ASUS E35M1-I; cpu: AMD E-350; mem: 4 Gb; hdd: 6xSATA
-
mboutahri
- NewUser

- Posts: 2
- Joined: 11 Oct 2012 21:01
- Status: Offline
Re: Error: The changes could not be applied (error code 1).
Hi all,
I have find the solution for this problem in this web site http://www.r71.nl/kb/technical/273-free ... onfig-file
remove this file rm /usr/home/transmission/.config/transmission-daemon/settings.json.
But I have another problem the deamon start but when i add a torrent.
I have a permission denied.
folders are those parameters.
drwxrwxrwx 2 transmission transmission 2 Oct 8 20:56 download
drwxrwxrwx 2 transmission transmission 2 Oct 8 20:56 torrents
drwxrwxrwx 2 transmission transmission 2 Oct 8 20:57 unfinished
but when i would like see where are the torrents they aren't in the /data/torrents but in /home/transmission/.config/transmission-daemon/torrents.
nas4free:/home/transmission/.config/transmission-daemon/torrents# ll
total 76
-rw------- 1 transmission transmission 13281 Oct 12 20:49 Fringe.S04E17.FRENCH.720p.WEB-DL.x264-CeD.7f406704baa30691.torrent
-rw------- 1 transmission transmission 60580 Oct 12 20:52 [www.Cpasbien.com] Angie_Stone-Rich_Girl-2012-C4.3537b08ddfe4086b.torrent
Can you help me because i don't know what is the problem
Thanks a lot
Mohamed
I have find the solution for this problem in this web site http://www.r71.nl/kb/technical/273-free ... onfig-file
remove this file rm /usr/home/transmission/.config/transmission-daemon/settings.json.
But I have another problem the deamon start but when i add a torrent.
I have a permission denied.
folders are those parameters.
drwxrwxrwx 2 transmission transmission 2 Oct 8 20:56 download
drwxrwxrwx 2 transmission transmission 2 Oct 8 20:56 torrents
drwxrwxrwx 2 transmission transmission 2 Oct 8 20:57 unfinished
but when i would like see where are the torrents they aren't in the /data/torrents but in /home/transmission/.config/transmission-daemon/torrents.
nas4free:/home/transmission/.config/transmission-daemon/torrents# ll
total 76
-rw------- 1 transmission transmission 13281 Oct 12 20:49 Fringe.S04E17.FRENCH.720p.WEB-DL.x264-CeD.7f406704baa30691.torrent
-rw------- 1 transmission transmission 60580 Oct 12 20:52 [www.Cpasbien.com] Angie_Stone-Rich_Girl-2012-C4.3537b08ddfe4086b.torrent
Can you help me because i don't know what is the problem
Thanks a lot
Mohamed
You do not have the required permissions to view the files attached to this post.
-
danzi
- Starter

- Posts: 66
- Joined: 11 Nov 2012 23:24
- Location: Budapest
- Status: Offline
Re: Error: The changes could not be applied (error code 1).
Guys, same error here...
Embedded system from a 4gb pendrive...
I have a raidz pool, mounted under mnt/raidpool.
I have a folder for transmission here with 3 subfolders
-config
-drop
-incomplete
everything has 777 and owner:group is transmission:transmission.
settings.json is nowhere to be found.
nas4free:/mnt/raidpool/!!TTOORR!!# ls -la
total 11
drwxrwxrwx 5 transmission transmission 5 Nov 11 18:54 .
drwxrwxrwx 30 root wheel 36 Nov 11 19:15 ..
drwxrwxrwx 2 transmission transmission 3 Nov 11 21:29 config
drwxrwxrwx 2 transmission transmission 2 Nov 11 18:54 drop
drwxrwxrwx 2 transmission transmission 2 Nov 11 18:54 incomplete
in the webgui it just says Error: The changes could not be applied (error code 1).
trying maually:
nas4free:/mnt/raidpool/!!TTOORR!!# /etc/rc.d/transmission start
0: Event not found.
chmod: /home/transmission/.config/transmission-daemon/settings.json.new: No such file or directory
mv: rename /home/transmission/.config/transmission-daemon/settings.json.new to /home/transmission/.config/transmission-daemon/settings.json: No such file or directory
Starting transmission.
0: Event not found.
/etc/rc.d/transmission: WARNING: failed to start transmission
am I missing some vital setting here?
Thanks in advande
Embedded system from a 4gb pendrive...
I have a raidz pool, mounted under mnt/raidpool.
I have a folder for transmission here with 3 subfolders
-config
-drop
-incomplete
everything has 777 and owner:group is transmission:transmission.
settings.json is nowhere to be found.
nas4free:/mnt/raidpool/!!TTOORR!!# ls -la
total 11
drwxrwxrwx 5 transmission transmission 5 Nov 11 18:54 .
drwxrwxrwx 30 root wheel 36 Nov 11 19:15 ..
drwxrwxrwx 2 transmission transmission 3 Nov 11 21:29 config
drwxrwxrwx 2 transmission transmission 2 Nov 11 18:54 drop
drwxrwxrwx 2 transmission transmission 2 Nov 11 18:54 incomplete
in the webgui it just says Error: The changes could not be applied (error code 1).
trying maually:
nas4free:/mnt/raidpool/!!TTOORR!!# /etc/rc.d/transmission start
0: Event not found.
chmod: /home/transmission/.config/transmission-daemon/settings.json.new: No such file or directory
mv: rename /home/transmission/.config/transmission-daemon/settings.json.new to /home/transmission/.config/transmission-daemon/settings.json: No such file or directory
Starting transmission.
0: Event not found.
/etc/rc.d/transmission: WARNING: failed to start transmission
am I missing some vital setting here?
Thanks in advande
----------------------------------------------
Dell T130 - 32Gb ECC - ESXi 6.7
VM Full Instal - 11.2.0.4 - Omnius (revision 6005)
HP/LSI 9121-4i SAS2008 Pass Through mode
2 x 2Tb ZFS mirror
1 x 3Tb UFS
----------------------------------------------
Dell T130 - 32Gb ECC - ESXi 6.7
VM Full Instal - 11.2.0.4 - Omnius (revision 6005)
HP/LSI 9121-4i SAS2008 Pass Through mode
2 x 2Tb ZFS mirror
1 x 3Tb UFS
----------------------------------------------
-
danzi
- Starter

- Posts: 66
- Joined: 11 Nov 2012 23:24
- Location: Budapest
- Status: Offline
Re: Error: The changes could not be applied (error code 1).
ok, managed to resolve it... apparently they cannot be nested, a config folder cannot be in the download folder etc...
works ok now so it seems
works ok now so it seems
----------------------------------------------
Dell T130 - 32Gb ECC - ESXi 6.7
VM Full Instal - 11.2.0.4 - Omnius (revision 6005)
HP/LSI 9121-4i SAS2008 Pass Through mode
2 x 2Tb ZFS mirror
1 x 3Tb UFS
----------------------------------------------
Dell T130 - 32Gb ECC - ESXi 6.7
VM Full Instal - 11.2.0.4 - Omnius (revision 6005)
HP/LSI 9121-4i SAS2008 Pass Through mode
2 x 2Tb ZFS mirror
1 x 3Tb UFS
----------------------------------------------
- daoyama
- Developer

- Posts: 394
- Joined: 25 Aug 2012 09:28
- Location: Japan
- Status: Offline
Re: Error: The changes could not be applied (error code 1).
Hi,
If so, try to create on other directory which uses only alphabet.
Daisuke Aoyama
It seems you have a problem about parent directory name. "!!TTOORR!!" is correct name??danzi wrote: nas4free:/mnt/raidpool/!!TTOORR!!# /etc/rc.d/transmission start
0: Event not found.
If so, try to create on other directory which uses only alphabet.
Daisuke Aoyama
NAS4Free 10.2.0.2.2115 (x64-embedded), 10.2.0.2.2258 (arm), 10.2.0.2.2258(dom0)
GIGABYTE 5YASV-RH, Celeron E3400 (Dual 2.6GHz), ECC 8GB, Intel ET/CT/82566DM (on-board), ZFS mirror (2TBx2)
ASRock E350M1/USB3, 16GB, Realtek 8111E (on-board), ZFS mirror (2TBx2)
MSI MS-9666, Core i7-860(Quad 2.8GHz/HT), 32GB, Mellanox ConnectX-2 EN/Intel 82578DM (on-board), ZFS mirror (3TBx2+L2ARC/ZIL:SSD128GB)
Develop/test environment:
VirtualBox 512MB VM, ESXi 512MB-8GB VM, Raspberry Pi, Pi2, ODROID-C1
GIGABYTE 5YASV-RH, Celeron E3400 (Dual 2.6GHz), ECC 8GB, Intel ET/CT/82566DM (on-board), ZFS mirror (2TBx2)
ASRock E350M1/USB3, 16GB, Realtek 8111E (on-board), ZFS mirror (2TBx2)
MSI MS-9666, Core i7-860(Quad 2.8GHz/HT), 32GB, Mellanox ConnectX-2 EN/Intel 82578DM (on-board), ZFS mirror (3TBx2+L2ARC/ZIL:SSD128GB)
Develop/test environment:
VirtualBox 512MB VM, ESXi 512MB-8GB VM, Raspberry Pi, Pi2, ODROID-C1