XigmaNAS 12.0.0.4.6881 released (FreeBSD 12.0-RELEASE-P10)

[zoon01]

We are pleased to announce the release of XigmaNAS version 12.0.0.4.6881 - Reticulus.

First BACKUP your current Configuration!
READ readme_12.0.txt please before you do anything!

Download build 12.0.0.4.6881

Warning: This release has broken Extended GUI!
There is added an option to use colorful meters on the index page.

Changes after release 12.0.0.4.6766
=======================
- Upgrade FreeBSD 12.0-RELEASE to P10.
- Update translations.
- WebGUI code & framework improvements.
- Add option for colorful meters. (IE11 not supported)
- Add mpsutil and mprutil utility for managing LSI Fusion-MPT 2/3 controllers.
- Upgrade to python36.
- Upgrade bash to 5.0 P11.
- Upgrade e2fsprogs to 1.45.3.
- Upgrade nano to 4.4.
- Upgrade php to 7.3.9.
- Upgrade mariadb to 10.2.26.
- Upgrade virtualbox-ose to 5.2.32.
- Upgrade syncthing to 1.2.2.
- Upgrade zoneinfo to 2019c.
- Upgrade rrdtool to 1.7.2.
- Upgrade mDNSResponder to 878.260.1.
- Upgrade dialog to 1.3-20190808.
- Upgrade msmtp to 1.8.5.
- Upgrade devcpu-data to 1.24.

fixes:
===
- Fix missing libs.


Basic Note:
- Make a new backup of your system configuration and store this on safe location, the system config.xml could be upgraded!
- Clear your browser's cache to avoid display issues after upgrade when coming from older release.

Regards,
Team XigmaNAS

[netware5]

Just see that new version has been released after 6877. But will ask question regarding 6877. I see these messages in syslog. Any ideas about the reason?

Code: Select all

Sep 23 02:43:06	fileserver	1 2019-09-23T02:43:06.227943+03:00 fileserver.pendgy.bg root 3329 - - AUTH: admin logged in from IP address 192.168.77.56
Sep 23 02:42:17	fileserver	1 2019-09-23T02:42:17.248235+03:00 fileserver.pendgy.bg root 3238 - - onebuttoninstaller-extension: started
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.870392+03:00 fileserver.pendgy.bg lighttpd 3084 - - (server.c.1521) server started (lighttpd/1.4.54)
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.711150+03:00 fileserver.pendgy.bg root 2927 - - /etc/rc.d/sysctl: WARNING: sysctl hw.ix.txd does not exist.
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.709630+03:00 fileserver.pendgy.bg root 2925 - - /etc/rc.d/sysctl: WARNING: sysctl hw.ix.rxd does not exist.
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.708054+03:00 fileserver.pendgy.bg root 2923 - - /etc/rc.d/sysctl: WARNING: sysctl hw.ix.num_queues does not exist.
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.704944+03:00 fileserver.pendgy.bg root 2919 - - /etc/rc.d/sysctl: WARNING: sysctl hw.igb.txd does not exist.
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.703401+03:00 fileserver.pendgy.bg root 2917 - - /etc/rc.d/sysctl: WARNING: sysctl hw.igb.rxd does not exist.
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.701852+03:00 fileserver.pendgy.bg root 2915 - - /etc/rc.d/sysctl: WARNING: sysctl hw.igb.num_queues does not exist.
Sep 23 02:42:16	fileserver	1 2019-09-23T02:42:16.700267+03:00 fileserver.pendgy.bg root 2913 - - /etc/rc.d/sysctl: WARNING: sysctl hw.igb.max_interrupt_rate does not exist.

[zoon01]

.6877 had a bug in installer, fixed in .6881, please upgrade!

about: - /etc/rc.d/sysctl: WARNING: sysctl hw.ix.txd does not exist.
Those variables are removed/changed on FreeBSD 12 and no longer can be used.

Goto System > Advanced > sysctl.conf and delete the above variables, now your log will get clean again.

[jerryone]

Warning: This release has broken Extended GUI!
There is added an option to use colorful meters on the index page.

- Add option for colorful meters. (IE11 not supported)

Basically now extended gui is available again? But index home is not supported in IE11? With extended gui!

-upgraded without any problems. Embended

[crest]

...
Basically now extended gui is available again? But index home is not supported in IE11? With extended gui!
...

Not yet, will drop a note when Extended GUI is updated.

[sfranzis]

Upgrade from 11.2.0.4.6766 to 12.0.0.4.6881 was ok but my server didn't come up again after reboot.
Installed 11.2.0.4.6881 now, restored config. Everything fine.

System info: X7SPA-H - Intel Atom D510 - 4GB memory - embedded install on USB key

Regards
Stefan

[netware5]

Finally managed to do fresh install of 12.0.0.4.6881 from Live CD. It seems to be that SanDisk Cruzer Fit 16GB USB flash is not compatible with 12.0. I never experienced such problems with all 11.x versions till 6743, which was the last 11.2 I used. Now managed to install 6881 on "no name" cheap USB flash. All three SanDisk Cruzer Fit 16GB I have (including one freshly unpacked) failed.

Now I would like to report some irregularities identified during boot.

1. Stange message from bootloader

It is a bit strange that bootloader "knows" the name of my Zpool and trries to do something on such early stage. Such message does not exist in 11.2 boot log.

Xigmanas12_boot-1.PNG

2. Firmware warnings

Code: Select all

Sep 23 20:45:35	fileserver	kernel: ioapic0: Changing APIC ID to 8
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20181003/tbfadt-850)
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20181003/tbfadt-850)
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20181003/tbfadt-748)
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20181003/tbfadt-748)
Sep 23 20:45:35	fileserver	kernel: random: unblocking device.
Sep 23 20:45:35	fileserver	kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads

Xigmanas12_boot-2.PNG

3. Several sysctl related messages

Xigmanas12_boot-3.PNG

4. Several DHCP's pid related messages

Xigmanas12_boot-4.PNG

Xigmanas12_boot-5.PNG

5. Several messages about invalid characters

Xigmanas12_boot-6.PNG

[jerryone]

Finally managed to do fresh install of 12.0.0.4.6881 from Live CD. It seems to be that SanDisk Cruzer Fit 16GB USB flash is not compatible with 12.0. I never experienced such problems with all 11.x versions till 6743, which was the last 11.2 I used. Now managed to install 6881 on "no name" cheap USB flash. All three SanDisk Cruzer Fit 16GB I have (including one freshly unpacked) failed.

Now I would like to report some irregularities identified during boot.

1. Stange message from bootloader

It is a bit strange that bootloader "knows" the name of my Zpool and trries to do something on such early stage. Such message does not exist in 11.2 boot log.

Xigmanas12_boot-1.PNG
2. Firmware warnings

Code: Select all

Sep 23 20:45:35	fileserver	kernel: ioapic0: Changing APIC ID to 8
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20181003/tbfadt-850)
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20181003/tbfadt-850)
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20181003/tbfadt-748)
Sep 23 20:45:35	fileserver	kernel: Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20181003/tbfadt-748)
Sep 23 20:45:35	fileserver	kernel: random: unblocking device.
Sep 23 20:45:35	fileserver	kernel: FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads

Xigmanas12_boot-2.PNG

3. Several sysctl related messages
Xigmanas12_boot-3.PNG
4. Several DHCP's pid related messages
Xigmanas12_boot-4.PNGXigmanas12_boot-5.PNG
5. Several messages about invalid characters

Xigmanas12_boot-6.PNG

Same here! But i didn't take this seriously! For what I need is working! If this will be improved will be a step forward and a good thing for all community! But time will resolve everything! Thanks!

[netware5]

Now with Python3.6 the wsdd script works! For details see here: viewtopic.php?f=56&t=14467&p=92020#p92020

[ggibeau]

Upgraded from 12.0.0.4.6766 and get this error when hitting server URL - I do see login screen and get this after entering credentials (after flushing browser history and cache)

Fatal error: Cannot redeclare get_upsinfo() (previously declared in /usr/local/www/index.php:145) in /etc/inc/system.inc on line 802

I do have current backup of xml before attempting upgrade.

Any thoughts?

TIA

[jamaroney]

Upgraded from 12.0.0.4.6766 and get this error when hitting server URL - I do see login screen and get this after entering credentials (after flushing browser history and cache)

Fatal error: Cannot redeclare get_upsinfo() (previously declared in /usr/local/www/index.php:145) in /etc/inc/system.inc on line 802

I'm experiencing the same thing.

[ms49434]

Upgraded from 12.0.0.4.6766 and get this error when hitting server URL - I do see login screen and get this after entering credentials (after flushing browser history and cache)

Fatal error: Cannot redeclare get_upsinfo() (previously declared in /usr/local/www/index.php:145) in /etc/inc/system.inc on line 802

I'm experiencing the same thing.

The issue is caused by Extended GUI. At the moment the only solution is to disable and remove it.

[ggibeau]

How do I disable it when I can;t get into the GUI?

Thanks

[ms49434]

How do I disable it when I can;t get into the GUI?

Thanks

Just switch to a different page, i.e. replace 'index.php' with 'status_services.php' in your browser's bar, then go to Extensions > Extended GUI.

[jamaroney]

My mistake - my error message is slightly different than ggibeau. Mine says:
Fatal error: Cannot redeclare get_upsinfo() (previously declared in /usr/local/www/index.php:90) in /etc/inc/system.inc on line 802

However, I don't have (and never had) the Extended GUI. What's causing the problem?

[ms49434]

My mistake - my error message is slightly different than ggibeau. Mine says:
Fatal error: Cannot redeclare get_upsinfo() (previously declared in /usr/local/www/index.php:90) in /etc/inc/system.inc on line 802

However, I don't have (and never had) the Extended GUI. What's causing the problem?

Your index.php file is an older version and is not the one that is part of the 6881 release. Please check all installed extensions and command scripts.

[ggibeau]

That worked like a charm - thank you so much for your help.

-George-

[defcon999]

Since the last update, the boot-process ends at manual login-prompt.

What's the problem?

defcon999

[ms49434]

Since the last update, the boot-process ends at manual login-prompt.

What's the problem?

defcon999

please read: autologin

[defcon999]

Thanks for the hint and sorry for my carelessness

defcon999

[KTL]

Upgraded from 6766 with autologin script enabled. Thanks!

[igr4free]

Upgraded from 6766 without problems.

I liked ExtendedGUI Can we reinstall it in the future?

[raulfg3]

Upgraded from 6766 without problems.

I liked ExtendedGUI Can we reinstall it in the future?

yes, when it's updated

[igr4free]

Upgraded from 6766 without problems.

I liked ExtendedGUI Can we reinstall it in the future?

yes, when it's updated

[killaruns]

Good day to all...
In this release, I made a completely new installation, got such a problem
Described by the link below:
viewtopic.php?f=71&t=13922&p=86235&hili ... m+N#p89051

Corrected as described in the message, 30 min there are no more errors

[neptunus]

I see strange CPU load behavior. I do not get it and I have not seen this behavior before. Anyone have an idea how I can fix this?

load.PNG

load2.PNG

load3.PNG

[ms49434]

I see strange CPU load behavior. I do not get it and I have not seen this behavior before. Anyone have an idea how I can fix this?

load.PNG
load2.PNG
load3.PNG

The mismatch is caused by bug 403, it will be fixed in the next release

[neptunus]

The mismatch is caused by bug 403, it will be fixed in the next release

Thanks for the reply.