Upgrade 11.0.0.4 to 12.1.0.4 direct?

txtwincam · Post by **txtwincam** » 12 Jan 2020 14:58

I want to confirm my upgrade path. Can I just install on a new USB stick (Embedded) and restore the config or is there a path to 12.1.x?

My build:
Platform x64-embedded on Intel(R) Xeon(R) CPU 5160 @ 3.00GHz
System Intel S5000PSL
System BIOS Intel Corporation Version: S5000.86B.10.00.0094.101320081858 10/13/2008
Disk RAIDZ1 (13 JBOD disks) 20.3TB
OS Embedded on USB Stick (8GB)

Post by **raulfg3** » 13 Jan 2020 08:13

yes, it's correct, but please wait a bit a new release or read about some problems detected on latest 12.1.0.4.7091 : viewtopic.php?f=78&t=14912

txtwincam · Post by **txtwincam** » 13 Jan 2020 19:47

Thank you for your guidance. I will wait.

edewit · Post by **edewit** » 30 Mar 2020 06:29

Version 12.1.0.4.7389 was released a week ago. Can the question of the OP be answered positively? In other words, has the Samba issue been solved?
I mean to do the exact same thing: moving from 11.0.04 to 12.1.0.4.7389 with a new USB stick which has a fresh 12.1.0.4.7389 embedded install on it, a new mobo and use the exported config file from the 11.0.0.4 version.

My new build:
Asrock J5005-ITX mobo with 32GB RAM, 4x WD 3TB Red drives in Raidz2 using Thermaltake drive cages, 16GB Sandisk Extreme USB3, M4-ATX power supply on 24V solar system.

Post by **raulfg3** » 30 Mar 2020 09:47

Yes.

Save your actual config in a safe place.

Do a new embeded install from scrath (do NOT upgrade from webGUI)
boot from this new install.
restore your previosly saved config.
reboot.

done, you must have a upgraded XigmaNAS ready to use.

edewit · Post by **edewit** » 31 Mar 2020 06:10

Thank you for the confirmation. Everything went fine and I am using the latest FW now.

maurbuss · Post by **maurbuss** » 11 Apr 2020 09:54

I'm coming from 11.0.0.4 embedded. I created a new stick with 12.1.0.4.
Web gui access started ok, but after reloaded my old configuration and reboot, I have no webgui access.
I see this message:
Warning: array_key_exists() expects parameter 2 to be array, null given in /etc/inc/system.inc on line 166 Warning: session_start(): Cannot start session when headers already sent in /etc/inc/session.inc on line 52 Warning: session_regenerate_id(): Cannot regenerate session id - session is not active in /etc/inc/session.inc on line 39 Warning: Cannot modify header information - headers already sent by (output started at /etc/inc/system.inc:166) in /usr/local/www/login.php on line 44,

Schermata del 2020-04-11 09-46-44.png

I see these message also after login, no webgui.
Old shares, ssh access, password are ok.

Have you any idea?
Thank's

Post by **raulfg3** » 11 Apr 2020 11:23

from shell try option to restore webGUI or try to restore again config, somethings are not well populated on last upgrade.

Post by **raulfg3** » 11 Apr 2020 11:36

be carefull with lates txz file: https://sourceforge.net/p/xigmanas/code ... d00f2:7509

maurbuss · Post by **maurbuss** » 11 Apr 2020 14:44

I use embedded not full install, however nor restore webgui neither restore config, are working.
So i'm trying to reflash usb with embedded. Saved /etc/inc/system.inc and /usr/local/www/login.php
Access to webgui, restore old nas4free configuration, error...
Checked file version:
- system.inc unchanged
- login.php has nas4free header, restored 'old' xigmanas version, no error on login page, but error after login, related to /usr/local/www/index.php.
I'm not php expert, but, for some reason www directory is corrupted after old config restore.
Sorry for my english

Post by **ms49434** » 11 Apr 2020 14:51

maurbuss wrote: ↑
11 Apr 2020 14:44
I use embedded not full install, however nor restore webgui neither restore config, are working.
So i'm trying to reflash usb with embedded. Saved /etc/inc/system.inc and /usr/local/www/login.php
Access to webgui, restore old nas4free configuration, error...
Checked file version:
- system.inc unchanged
- login.php has nas4free header, restored 'old' xigmanas version, no error on login page, but error after login, related to /usr/local/www/index.php.
I'm not php expert, but, for some reason www directory is corrupted after old config restore.
Sorry for my english

which extensions are you running?

maurbuss · Post by **maurbuss** » 11 Apr 2020 15:20

I don't have any webgui extension installed, but I installed plex some years ago following this thread: viewtopic.php?t=9031

Schermata del 2020-04-11 15-19-49.png

maurbuss · Post by **maurbuss** » 11 Apr 2020 16:45

solved. Put old stick, removed all plex reference, saved configuration; reburned usb stick with 12*, restored configuration, so far all is ok.
I had read that extensions were not supported...
Thank's

Post by **raulfg3** » 11 Apr 2020 18:41

I have installed plex using OBI and have no problems sice ages.

Only extension problematic for me was Extended GUI.

maurbuss · Post by **maurbuss** » 11 Apr 2020 20:37

raulfg3 wrote: ↑
11 Apr 2020 18:41
I have installed plex using OBI and have no problems sice ages.

Only extension problematic for me was Extended GUI.

Thank's for suggestion. I just installed obi and plex via obi

XigmaNAS

Upgrade 11.0.0.4 to 12.1.0.4 direct?

Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?

Re: Upgrade 11.0.0.4 to 12.1.0.4 direct?