Full DMESG output is as follows
Code: Select all
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC2 #0: Mon Oct 8 03:51:59 JST 2012
aoyama@nas4free.local:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1666.72-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3851563008 (3673 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL MOPNV10N>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP/HT): APIC ID: 3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL MOPNV10N> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x30c0-0x30c7 mem 0xf0300000-0xf037ffff,0xe0000000-0xefffffff,0xf0200000-0xf02fffff irq 16 at device 2.0 on pci0
agp0: <Intel Pineview SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 8188k stolen memory
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:27:0e:01:fc:62
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3080-0x309f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3060-0x307f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3020-0x303f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0380400-0xf03807ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
siis0: <SiI3132 SATA controller> port 0x1000-0x107f mem 0xf0104000-0xf010407f,0xf0100000-0xf0103fff irq 21 at device 0.0 on pci6
siisch0: <SIIS channel> at channel 0 on siis0
siisch1: <SIIS channel> at channel 1 on siis0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0x30b8-0x30bf,0x30cc-0x30cf,0x30b0-0x30b7,0x30c8-0x30cb,0x30a0-0x30af mem 0xf0380000-0xf03803ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xce000-0xd27ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
md0: Preloaded image </mfsroot> 220200960 bytes at 0xffffffff81981c58
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <DaneElec> at usbus4
umass0: <DaneElec MicroUSB, class 0/0, rev 2.00/11.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:5:0:-1: Attached to scbus5
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD2500BEVT-75ZCT2 11.01A11> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <WDC WD3200AVVS-63L2B0 01.03A01> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad10
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <DaneElec MicroUSB 1100> Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7788MB (15950592 512 byte sectors: 255H 63S/T 992C)
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 13021256 Hz quality 1000
GEOM: da0: media size does not match label.
Trying to mount root from ufs:/dev/md0 []..."pciconf -lv"
Code: Select all
hostb0@pci0:0:0:0: class=0x060000 card=0x4f4d8086 chip=0xa0008086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10 Family DMI Bridge'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x4f4d8086 chip=0xa0018086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10 Family Integrated Graphics Controller'
class = display
subclass = VGA
pcib1@pci0:0:28:0: class=0x060400 card=0x4f4d8086 chip=0x27d08086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family PCI Express Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:1: class=0x060400 card=0x4f4d8086 chip=0x27d28086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family PCI Express Port 2'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:2: class=0x060400 card=0x4f4d8086 chip=0x27d48086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family PCI Express Port 3'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:3: class=0x060400 card=0x4f4d8086 chip=0x27d68086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family PCI Express Port 4'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x4f4d8086 chip=0x27c88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family USB UHCI Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x4f4d8086 chip=0x27c98086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family USB UHCI Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x4f4d8086 chip=0x27ca8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family USB UHCI Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x4f4d8086 chip=0x27cb8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family USB UHCI Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x4f4d8086 chip=0x27cc8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family USB2 EHCI Controller'
class = serial bus
subclass = USB
pcib5@pci0:0:30:0: class=0x060401 card=0x4f4d8086 chip=0x24488086 rev=0xe1 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Mobile PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x4f4d8086 chip=0x27bc8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'NM10 Family LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x4f4d8086 chip=0x27c18086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10/ICH7 Family SATA AHCI Controller'
class = mass storage
subclass = SATA
none0@pci0:0:31:3: class=0x0c0500 card=0x4f4d8086 chip=0x27da8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = 'N10/ICH 7 Family SMBus Controller'
class = serial bus
subclass = SMBus
re0@pci0:1:0:0: class=0x020000 card=0xd6158086 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
pcib6@pci0:5:0:0: class=0x060400 card=0x00000000 chip=0xe11112d8 rev=0x02 hdr=0x01
vendor = 'Pericom Semiconductor'
class = bridge
subclass = PCI-PCI
siis0@pci0:6:0:0: class=0x010600 card=0x31321095 chip=0x31321095 rev=0x01 hdr=0x00
vendor = 'Silicon Image, Inc.'
device = 'SiI 3132 Serial ATA Raid II Controller'
class = mass storage
subclass = SATA