This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
LAN media resets to (10baseT/UTP <full-duplex>)
-
Awesonne101
- NewUser
- Posts: 2
- Joined: 30 Jun 2012 16:09
- Status: Offline
LAN media resets to (10baseT/UTP <full-duplex>)
Hi, I'm using an old dell dimension 2400 motherboard for my NAS with a 10/100 interface. I have my LAN media set to auto and when it starts up it is set to 100mb/s but after using it for a while it switches to 10mb/s. I'm not sure why this is as my router supports 10/100/1000 and all the machines I use to connect to my NAS use at least 100mb/s. I tried to change the media from auto to 100 but when I rebooted I couldn't connect anymore. I reset it to auto but I still keep dropping to 10mb/s. I need help! 10mb/s is extremely slow. Thanks.
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: LAN media resets to (10baseT/UTP <full-duplex>)
It can be hard for me to identify your NIC, actually I think is a Broadcom 4401
I found others users with same problem: http://forums.freebsd.org/showthread.php?t=1783
But not sure what is the sollution.
I found others users with same problem: http://forums.freebsd.org/showthread.php?t=1783
But not sure what is the sollution.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510