This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Zpool export

Post/Debate your Suggestions & Requests of XigmaNAS here. This ONLY pertains to XigmaNAS.
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 758
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Contact ChriZathens
Status: Offline

Zpool export

Post by ChriZathens »

Hey there...
New to ZFS (just yesterday I managed to finish my 2xRaid5 arrays conversion to ZFS)
I've seen in many posts here that if you want to transfer a raidz1 array to a different nas you should export first your pool.
If I look in Disks|ZFS|Pools|Tools I see no export command... Am I missing something? Shouldn't this be added? (Hence the "Suggestions & Requests" category I posted in.. :) )
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
Top
Post Reply

Return to “Suggestions & Requests”