Hi there guys!
Just yesterday I finally finished the migration from 2 raid5 arrays to 2 raidz1 arrays...
After copying data back I thought it would be a good idea to scrub my pools.
A few minutes ago I started a scrub in the big array which holds about 4TB of data.
The information tab reports a scrub speed of about 300Mb/s.
Is this speed OK? What speeds do you get?
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
scrub speed
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
scrub speed
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
-
fsbruva
- Advanced User
- Posts: 378
- Joined: 21 Sep 2012 14:50
- Status: Offline
Re: scrub speed
It really depends on the drives you have, RAM and processor speed. I think mine gets around 500Mb/s - or 63 MB/s.
As an aside, I reconfigured my pool recently from one big pool to several datasets. The amount of data did not decrease, but the necessary time to scrub the pool went down by about 33%.
As an aside, I reconfigured my pool recently from one big pool to several datasets. The amount of data did not decrease, but the necessary time to scrub the pool went down by about 33%.