Is RTL8112L supported by Nas4Free 9.1?

[dh_leslie]

I built my nas on ASUS M4A785TD-V EVO with NIC RTL8112L. It seems Nas4Free only detected RTL8112L as a 100M NIC. The cables are fine because my MAC BOOK pro works well at 1000M with the same cable.
Any solution for this problem? Thanks.

[al562]

Hi dh_leslie,

Welcome to the NAS4Free forum.

Please read and follow the Forum Rules & Guidelines and the FAQs.
By doing so you will:

• Understand what information you should provide when you ask a question or report a problem/bug. By providing all information upfront you will get faster and better answers; that's what you want right?
• Find the answer to your problem in the FAQs or use the Advanced search to search the forum.
• Help us understand your problem and allow us to provide an accurate answer/solution without asking additional questions.
• Help the community by keeping the forum clean, focused and professional.
• Remember to use WebGUI Tab> Help|Report Generator when creating new topics/threads, it is available if your Nas4Free version > 0.7
• If you have not, then please read the latest Setup & User Guide.

The Realtek NIC are sometimes problematic. Please start by reading Q: Where can I find a list of hardware compatible with NAS4Free/FreeBSD? If your RTL8112L is not found anywhere you may have to find and load the driver from the realtek site, if they have one, otherwise you may be stuck with 100Mb.

Good luck,
Al

[dh_leslie]

bought another NIC with RTL8168B, and reached 1000M speed

[al562]

Sometimes that is the easiest solution.

All the best,
Al