This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Wiki add compatibility

Post/Debate your Suggestions & Requests of XigmaNAS here. This ONLY pertains to XigmaNAS.
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
ChriZathens
Forum Moderator
Forum Moderator
Posts: 758
Joined: 23 Jun 2012 09:14
Location: Athens, Greece
Contact:
Contact ChriZathens
Status: Offline

Wiki add compatibility

Post by ChriZathens »

I know a lot of people have already confirmed this, but just for the record I would inform that in http://wiki.nas4free.org/doku.php?id=na ... _computers you could also add Hp Proliant Microserver N40L. It works out of the box and is capable of booting from usb just fine (thought about adding it myself, but seems that I cannot create an acount in wiki.)
Also I am using for almost two years now a Promise S150 TX4 SATA Controller which could also be added in http://wiki.nas4free.org/doku.php?id=na ... ontrollers
EDIT: would like to also add that Samsung 2TB SAMSUNG HD204UI, Hitachi Deskstar HDS725050KLA360 500GB, Seagate ST1500DL003-9VT16L 1.5TB, Seagate ST31500541AS 1.5TB and Samsung SAMSUNG HD154UI 1.5TB HDDs are working just fine, so they could be added in http://wiki.nas4free.org/doku.php?id=na ... ata_drives
My Nas
  1. Case: Fractal Design Define R2
  2. M/B: Supermicro x9scl-f
  3. CPU: Intel Celeron G1620
  4. RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
  5. PSU: Chieftec 850w 80+ modular
  6. Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
  7. O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
  8. Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S

Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
Top
User avatar
zoon01
Developer
Developer
Posts: 724
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Contact zoon01
Status: Offline

Re: Wiki add compatibility

Post by zoon01 »

Thank you,

you can always give the admins a reply like al562 or email al562@nas4free.org.

I'm shure they will put it on the wiki.

Regards,
zoon01
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.
Top
Post Reply

Return to “Suggestions & Requests”