Hello,
I apologize if this is the wrong forum, but some people have a problem with netatalk. The problem and my solution is described in the following thread:
viewtopic.php?f=26&t=755
It would be nice if someone could implement this for the WebGUI of NAS4Free.
Thanks in advance,
Stefan
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
[SOLVED] Problem in netatalk: error sys_getextattr_size
-
sfranzis
- Starter
- Posts: 74
- Joined: 27 Jun 2012 10:22
- Contact:
- Status: Offline
[SOLVED] Problem in netatalk: error sys_getextattr_size
Supermicro A2SDi-4C-HLN4F 32GB ECCRAM, 4x6TB WD Red, Samsung 970 EVO Plus
Supermicro X7SPA-H 4GB RAM, 4x2TB Samsung Spinpoint F3, Crucial RealSSD C300
Supermicro X7SPA-H 4GB RAM, 4x2TB Samsung Spinpoint F3, Crucial RealSSD C300
-
zoon01
- Developer
- Posts: 724
- Joined: 20 Jun 2012 21:06
- Location: Netherlands
- Contact:
- Status: Offline
Re: Problem in netatalk: error sys_getextattr_size
fixed in rev 576.
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz
Development system is same system in virtualbox.
Development system is same system in virtualbox.