Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 605)

Post by **velivole18** » 02 Jan 2013 13:37

NAS4Free 9.1.0.1 (revision 605) x64-embedded
111909 RSDT1411 AMD Athlon(tm) 64 Processor 4000+ 1792MiB RAM

OHCI (generic) USB controller nVidia nForce MCP67 UDMA133 controller
bus=1 hubaddr=2 port=1 devaddr=2 interface=0 PLIP network interface
RTL8169S/8110S/8211 1000BASE-T media interface EHCI (generic) USB 2.0
controller

Subject:
Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 605)

Description:
Bonjour,

Je viens d'installer la version 9.1.0.1 - Sandstorm (revision 605).
Il apparait dans le journal à de multiples reprises l'erreur suivante :

Code: Select all

NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''

Je regarde en ssh le fichier en question qui est constitué comme ceci :

Code: Select all

group: compat
group_compat: nis
hosts: files dns
networks: files
passwd: compat
passwd_compat: nis
shells: files
services: compat
services_compat: nis
protocols: files
rpc: files

J'ai trouvé une description du fichier en question à ces adresses :

http://www.unix.com/man-page/freebsd/5/nsswitch.conf/
et
http://manpagesfr.free.fr/man/man5/nsswitch.conf.5.html

Mais je ne sais pas comment les concepteurs de Nas4Free ont prévu de le
configurer.
Bon, cette version est encore chaude puisque mise en ligne depuis moins de 12
heures, alors voici un des 1er petits soucis.

Merci pour votre aide.

Code: Select all

NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''

al562 · Post by **al562** » 02 Jan 2013 20:29

Bonjour Velivole18,

S'il vous plaît pardonnez mon Google français.

J'ai juste mis à jour à 605 et ne voyez pas cette erreur. Mon etc / nsswitch.conf semble le même que le vôtre. Je ne sais pas pourquoi vous voyez cette erreur. Pouvez-vous s'il vous plaît vérifier votre connexion réseau? Assurez-vous que le serveur peut voir d'autres clients sur le réseau et les clients peuvent se connecter au serveur. Puis redémarrez le serveur. Ensuite, laissez-nous savoir si l'erreur est toujours là.

Merci beaucoup,
Al

Post by **velivole18** » 02 Jan 2013 22:00

Hi,
I restarted my server, and it's same problem.
My server is OK, I think for all services (NFS, SSH, FTP, UpNp, Itunes/Daap, BitTorrent), I cant't see any problem.
It can see the net and I don't have any problem with another client (3 clients at home).
I can't tell I have problem with services, it's just I can read this error in log ...
After restarted, I can read same error.
perhaps can I send for you my log file attached with private message for you can read and find anything ?
Thank you for everything and again very good new year !

al562 · Post by **al562** » 02 Jan 2013 22:31

Merci pour le journal.
Je l'ai branché ici.

Code: Select all

    Jan  2 21:44:31 nas4free syslogd: kernel boot file is /boot/kernel/kernel
    Jan  2 21:44:31 nas4free kernel: Copyright (c) 1992-2012 The FreeBSD Project.
    Jan  2 21:44:31 nas4free kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    Jan  2 21:44:31 nas4free kernel: The Regents of the University of California. All rights reserved.
    Jan  2 21:44:31 nas4free kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
    Jan  2 21:44:31 nas4free kernel: FreeBSD 9.1-RELEASE #0 r244925M: Tue Jan  1 19:24:31 CET 2013
    Jan  2 21:44:31 nas4free kernel: root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
    Jan  2 21:44:31 nas4free kernel: CPU: AMD Athlon(tm) 64 Processor 4000+ (2394.20-MHz K8-class CPU)
    Jan  2 21:44:31 nas4free kernel: Origin = "AuthenticAMD"  Id = 0x30f72  Family = f  Model = 37  Stepping = 2
    Jan  2 21:44:31 nas4free kernel: Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
    Jan  2 21:44:31 nas4free kernel: Features2=0x1<SSE3>
    Jan  2 21:44:31 nas4free kernel: AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
    Jan  2 21:44:31 nas4free kernel: AMD Features2=0x1<LAHF>
    Jan  2 21:44:31 nas4free kernel: real memory  = 2147483648 (2048 MB)
    Jan  2 21:44:31 nas4free kernel: avail memory = 1548488704 (1476 MB)
    Jan  2 21:44:31 nas4free kernel: Event timer "LAPIC" quality 400
    Jan  2 21:44:31 nas4free kernel: ACPI APIC Table: <111909 APIC1411>
    Jan  2 21:44:31 nas4free kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
    Jan  2 21:44:31 nas4free kernel: kbd1 at kbdmux0
    Jan  2 21:44:31 nas4free kernel: cryptosoft0: <software crypto> on motherboard
    Jan  2 21:44:31 nas4free kernel: acpi0: <111909 RSDT1411> on motherboard
    Jan  2 21:44:31 nas4free kernel: acpi0: Power Button (fixed)
    Jan  2 21:44:31 nas4free kernel: acpi0: reservation of fefe1000, 1000 (3) failed
    Jan  2 21:44:31 nas4free kernel: acpi0: reservation of fee01000, ff000 (3) failed
    Jan  2 21:44:31 nas4free kernel: acpi0: reservation of fec00000, 1000 (3) failed
    Jan  2 21:44:31 nas4free kernel: acpi0: reservation of fee00000, 1000 (3) failed
    Jan  2 21:44:31 nas4free kernel: acpi0: reservation of 0, a0000 (3) failed
    Jan  2 21:44:31 nas4free kernel: acpi0: reservation of 100000, 7ff00000 (3) failed
    Jan  2 21:44:31 nas4free kernel: cpu0: <ACPI CPU> on acpi0
    Jan  2 21:44:31 nas4free kernel: attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
    Jan  2 21:44:31 nas4free kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
    Jan  2 21:44:31 nas4free kernel: Event timer "i8254" frequency 1193182 Hz quality 100
    Jan  2 21:44:31 nas4free kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
    Jan  2 21:44:31 nas4free kernel: Event timer "RTC" frequency 32768 Hz quality 0
    Jan  2 21:44:31 nas4free kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
    Jan  2 21:44:31 nas4free kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
    Jan  2 21:44:31 nas4free kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    Jan  2 21:44:31 nas4free kernel: pci0: <ACPI PCI bus> on pcib0
    Jan  2 21:44:31 nas4free kernel: pci0: <memory, RAM> at device 0.0 (no driver attached)
    Jan  2 21:44:31 nas4free kernel: isab0: <PCI-ISA bridge> port 0x1f00-0x1fff at device 1.0 on pci0
    Jan  2 21:44:31 nas4free kernel: isa0: <ISA bus> on isab0
    Jan  2 21:44:31 nas4free kernel: pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
    Jan  2 21:44:31 nas4free kernel: ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 21 at device 2.0 on pci0
    Jan  2 21:44:31 nas4free kernel: usbus0 on ohci0
    Jan  2 21:44:31 nas4free kernel: ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebfec00-0xfebfecff irq 22 at device 2.1 on pci0
    Jan  2 21:44:31 nas4free kernel: usbus1: EHCI version 1.0
    Jan  2 21:44:31 nas4free kernel: usbus1 on ehci0
    Jan  2 21:44:31 nas4free kernel: ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq 23 at device 4.0 on pci0
    Jan  2 21:44:31 nas4free kernel: usbus2 on ohci1
    Jan  2 21:44:31 nas4free kernel: ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebfe800-0xfebfe8ff irq 20 at device 4.1 on pci0
    Jan  2 21:44:31 nas4free kernel: usbus3: EHCI version 1.0
    Jan  2 21:44:31 nas4free kernel: usbus3 on ehci1
    Jan  2 21:44:31 nas4free kernel: atapci0: <nVidia nForce MCP67 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
    Jan  2 21:44:31 nas4free kernel: ata0: <ATA channel> at channel 0 on atapci0
    Jan  2 21:44:31 nas4free kernel: ata1: <ATA channel> at channel 1 on atapci0
    Jan  2 21:44:31 nas4free kernel: pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci1: <ACPI PCI bus> on pcib1
    Jan  2 21:44:31 nas4free kernel: ahci0: <NVIDIA MCP67 AHCI SATA controller> port 0xf80-0xf87,0xf00-0xf03,0xe80-0xe87,0xe00-0xe03,0xdc00-0xdc0f mem 0xfebfa000-0xfebfbfff irq 21 at device 9.0 on pci0
    Jan  2 21:44:31 nas4free kernel: ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
    Jan  2 21:44:31 nas4free kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
    Jan  2 21:44:31 nas4free kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
    Jan  2 21:44:31 nas4free kernel: ahcich2: <AHCI channel> at channel 2 on ahci0
    Jan  2 21:44:31 nas4free kernel: ahcich3: <AHCI channel> at channel 3 on ahci0
    Jan  2 21:44:31 nas4free kernel: nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd880-0xd887 mem 0xfebfc000-0xfebfcfff,0xfebfe400-0xfebfe4ff,0xfebfe000-0xfebfe00f irq 22 at device 10.0 on pci0
    Jan  2 21:44:31 nas4free kernel: miibus0: <MII bus> on nfe0
    Jan  2 21:44:31 nas4free kernel: rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
    Jan  2 21:44:31 nas4free kernel: rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
    Jan  2 21:44:31 nas4free kernel: nfe0: Ethernet address: 00:19:66:6b:72:e2
    Jan  2 21:44:31 nas4free kernel: pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci2: <ACPI PCI bus> on pcib2
    Jan  2 21:44:31 nas4free kernel: pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci3: <ACPI PCI bus> on pcib3
    Jan  2 21:44:31 nas4free kernel: pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci4: <ACPI PCI bus> on pcib4
    Jan  2 21:44:31 nas4free kernel: pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci5: <ACPI PCI bus> on pcib5
    Jan  2 21:44:31 nas4free kernel: pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci6: <ACPI PCI bus> on pcib6
    Jan  2 21:44:31 nas4free kernel: pcib7: <ACPI PCI-PCI bridge> at device 16.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci7: <ACPI PCI bus> on pcib7
    Jan  2 21:44:31 nas4free kernel: pcib8: <ACPI PCI-PCI bridge> at device 17.0 on pci0
    Jan  2 21:44:31 nas4free kernel: pci8: <ACPI PCI bus> on pcib8
    Jan  2 21:44:31 nas4free kernel: vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 23 at device 18.0 on pci0
    Jan  2 21:44:31 nas4free kernel: amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3
    Jan  2 21:44:31 nas4free kernel: acpi_button0: <Power Button> on acpi0
    Jan  2 21:44:31 nas4free kernel: ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
    Jan  2 21:44:31 nas4free kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    Jan  2 21:44:31 nas4free kernel: ppc0: FIFO with 16/16/9 bytes threshold
    Jan  2 21:44:31 nas4free kernel: ppbus0: <Parallel port bus> on ppc0
    Jan  2 21:44:31 nas4free kernel: plip0: <PLIP network interface> on ppbus0
    Jan  2 21:44:31 nas4free kernel: lpt0: <Printer> on ppbus0
    Jan  2 21:44:31 nas4free kernel: lpt0: Interrupt-driven port
    Jan  2 21:44:31 nas4free kernel: ppi0: <Parallel I/O> on ppbus0
    Jan  2 21:44:31 nas4free kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
    Jan  2 21:44:31 nas4free kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
    Jan  2 21:44:31 nas4free kernel: kbd0 at atkbd0
    Jan  2 21:44:31 nas4free kernel: atkbd0: [GIANT-LOCKED]
    Jan  2 21:44:31 nas4free kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
    Jan  2 21:44:31 nas4free kernel: sc0: <System console> at flags 0x100 on isa0
    Jan  2 21:44:31 nas4free kernel: sc0: VGA <16 virtual consoles, flags=0x300>
    Jan  2 21:44:31 nas4free kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Jan  2 21:44:31 nas4free kernel: ctl: CAM Target Layer loaded
    Jan  2 21:44:31 nas4free kernel: powernow0: <Cool`n'Quiet K8> on cpu0
    Jan  2 21:44:31 nas4free kernel: ZFS filesystem version 5
    Jan  2 21:44:31 nas4free kernel: ZFS storage pool version 28
    Jan  2 21:44:31 nas4free kernel: Timecounters tick every 1.000 msec
    Jan  2 21:44:31 nas4free kernel: ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
    Jan  2 21:44:31 nas4free kernel: iSCSI boot driver version 0.2.6
    Jan  2 21:44:31 nas4free kernel: md0: Preloaded image </mfsroot> 230686720 bytes at 0xffffffff819a3c58
    Jan  2 21:44:31 nas4free kernel: usbus0: 12Mbps Full Speed USB v1.0
    Jan  2 21:44:31 nas4free kernel: usbus1: 480Mbps High Speed USB v2.0
    Jan  2 21:44:31 nas4free kernel: usbus2: 12Mbps Full Speed USB v1.0
    Jan  2 21:44:31 nas4free kernel: usbus3: 480Mbps High Speed USB v2.0
    Jan  2 21:44:31 nas4free kernel: ugen0.1: <nVidia> at usbus0
    Jan  2 21:44:31 nas4free kernel: uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
    Jan  2 21:44:31 nas4free kernel: ugen1.1: <nVidia> at usbus1
    Jan  2 21:44:31 nas4free kernel: uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
    Jan  2 21:44:31 nas4free kernel: ugen2.1: <nVidia> at usbus2
    Jan  2 21:44:31 nas4free kernel: uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
    Jan  2 21:44:31 nas4free kernel: ugen3.1: <nVidia> at usbus3
    Jan  2 21:44:31 nas4free kernel: uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
    Jan  2 21:44:31 nas4free kernel: uhub0: 6 ports with 6 removable, self powered
    Jan  2 21:44:31 nas4free kernel: uhub2: 6 ports with 6 removable, self powered
    Jan  2 21:44:31 nas4free kernel: uhub1: 6 ports with 6 removable, self powered
    Jan  2 21:44:31 nas4free kernel: uhub3: 6 ports with 6 removable, self powered
    Jan  2 21:44:31 nas4free kernel: ugen1.2: <Generic> at usbus1
    Jan  2 21:44:31 nas4free kernel: umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.02, addr 2> on usbus1
    Jan  2 21:44:31 nas4free kernel: umass0:  SCSI over Bulk-Only; quirks = 0x4101
    Jan  2 21:44:31 nas4free kernel: umass0:7:0:-1: Attached to scbus7
    Jan  2 21:44:31 nas4free kernel: cd0 at ata0 bus 0 scbus0 target 1 lun 0
    Jan  2 21:44:31 nas4free kernel: cd0: <ASUS CRW-4832AS 0.67> Removable CD-ROM SCSI-0 device
    Jan  2 21:44:31 nas4free kernel: cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
    Jan  2 21:44:31 nas4free kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
    Jan  2 21:44:31 nas4free kernel: ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
    Jan  2 21:44:31 nas4free kernel: ada0: <WDC WD20EARS-00MVWB0 50.0AB50> ATA-8 SATA 2.x device
    Jan  2 21:44:31 nas4free kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
    Jan  2 21:44:31 nas4free kernel: ada0: Command Queueing enabled
    Jan  2 21:44:31 nas4free kernel: ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
    Jan  2 21:44:31 nas4free kernel: ada0: Previously was known as ad4
    Jan  2 21:44:31 nas4free kernel: ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
    Jan  2 21:44:31 nas4free kernel: ada1: <WDC WD20EARS-00MVWB0 50.0AB50> ATA-8 SATA 2.x device
    Jan  2 21:44:31 nas4free kernel: ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
    Jan  2 21:44:31 nas4free kernel: ada1: Command Queueing enabled
    Jan  2 21:44:31 nas4free kernel: ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
    Jan  2 21:44:31 nas4free kernel: ada1: Previously was known as ad6
    Jan  2 21:44:31 nas4free kernel: ada2 at ahcich2 bus 0 scbus4 target 0 lun 0
    Jan  2 21:44:31 nas4free kernel: ada2: da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
    Jan  2 21:44:31 nas4free kernel: da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device
    Jan  2 21:44:31 nas4free kernel: da0: 40.000MB/s transfers
    Jan  2 21:44:31 nas4free kernel: da0: 7800MB (15974400 512 byte sectors: 255H 63S/T 994C)
    Jan  2 21:44:31 nas4free kernel: <WDC WD20EARS-00MVWB0 50.0AB50> ATA-8 SATA 2.x device
    Jan  2 21:44:31 nas4free kernel: ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
    Jan  2 21:44:31 nas4free kernel: ada2: Command Queueing enabled
    Jan  2 21:44:31 nas4free kernel: ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
    Jan  2 21:44:31 nas4free kernel: ada2: Previously was known as ad8
    Jan  2 21:44:31 nas4free kernel: ada3 at ahcich3 bus 0 scbus5 target 0 lun 0
    Jan  2 21:44:31 nas4free kernel: ada3: <WDC WD20EARS-00MVWB0 50.0AB50> ATA-8 SATA 2.x device
    Jan  2 21:44:31 nas4free kernel: ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
    Jan  2 21:44:31 nas4free kernel: ada3: Command Queueing enabled
    Jan  2 21:44:31 nas4free kernel: ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
    Jan  2 21:44:31 nas4free kernel: ada3: Previously was known as ad10
    Jan  2 21:44:31 nas4free kernel: Timecounter "TSC" frequency 2394198658 Hz quality 800
    Jan  2 21:44:31 nas4free kernel: GEOM: da0: geometry does not match label (16h,63s != 255h,63s).
    Jan  2 21:44:31 nas4free kernel: GEOM: da0: media size does not match label.
    Jan  2 21:44:31 nas4free kernel: Trying to mount root from ufs:/dev/md0 []...
    Jan  2 21:44:31 nas4free ntpdate: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:31 nas4free rpcbind: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free mountd[1924]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free nfsd[1937]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free chown: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free -su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free _su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:33 nas4free transmission-remote: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free kernel: ada2
    Jan  2 21:44:36 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free proftpd: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free proftpd[2241]: nas4free.famille - ProFTPD 1.3.4b (maint) (built Tue Jan 1 2013 20:34:11 CET) standalone mode STARTUP
    Jan  2 21:44:36 nas4free pdbedit: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free last message repeated 3 times
    Jan  2 21:44:37 nas4free nmbd[2344]: [2013/01/02 21:44:37.007421,  0] nmbd/nmbd_become_dmb.c:294(become_domain_master_browser_bcast)
    Jan  2 21:44:37 nas4free nmbd[2344]:   become_domain_master_browser_bcast:
    Jan  2 21:44:37 nas4free nmbd[2344]:   Attempting to become domain master browser on workgroup FAMILLE on subnet 192.168.0.50
    Jan  2 21:44:37 nas4free nmbd[2344]: [2013/01/02 21:44:37.035111,  0] nmbd/nmbd_become_dmb.c:307(become_domain_master_browser_bcast)
    Jan  2 21:44:37 nas4free nmbd[2344]:   become_domain_master_browser_bcast: querying subnet 192.168.0.50 for domain master browser on workgroup FAMILLE
    Jan  2 21:44:37 nas4free smbd[2347]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free sshd: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free cron: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Firefly Version svn-1696: Starting with debuglevel 2
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Plugin loaded: ssc-ffmpeg/svn-1696
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Plugin loaded: rsp/svn-1696
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Plugin loaded: daap/svn-1696
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Starting signal handler
    Jan  2 21:44:37 nas4free mt-daapd[2518]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free mt-daapd[2518]: Initializing database
    Jan  2 21:44:37 nas4free lighttpd[2590]: (log.c.166) server started
    Jan  2 21:44:38 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:38 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Received from 192.168.0.50:5353   23 nas4free._nfs._tcp.local. TXT path=/mnt/pools1/users
    Jan  2 21:44:38 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Resetting to Probing:   22 nas4free._nfs._tcp.local. SRV 0 0 2049 nas4free.local.
    Jan  2 21:44:39 nas4free login: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:39 nas4free login: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:39 nas4free login: login on ttyv0 as root
    Jan  2 21:44:39 nas4free -tcsh: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:40 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Received from 192.168.0.50:5353   23 nas4free._nfs._tcp.local. TXT path=/mnt/pools1/users
    Jan  2 21:44:40 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Resetting to Probing:   22 nas4free._nfs._tcp.local. SRV 0 0 2049 nas4free.local.
    Jan  2 21:44:41 nas4free mt-daapd[2518]: Starting web server from /usr/local/share/mt-daapd/admin-root on port 3689
    Jan  2 21:44:41 nas4free mt-daapd[2518]: Serving 20120 songs.  Startup complete in 4 seconds
    Jan  2 21:44:41 nas4free mt-daapd[2518]: Rescanning database
    Jan  2 21:44:41 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Received from 192.168.0.50:5353   23 nas4free._nfs._tcp.local. TXT path=/mnt/pools1/users
    Jan  2 21:44:41 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Resetting to Probing:   22 nas4free._nfs._tcp.local. SRV 0 0 2049 nas4free.local.
    Jan  2 21:44:45 nas4free nmbd[2344]: [2013/01/02 21:44:45.050361,  0] nmbd/nmbd_become_dmb.c:112(become_domain_master_stage2)
    Jan  2 21:44:45 nas4free nmbd[2344]:   *****
    Jan  2 21:44:45 nas4free nmbd[2344]:
    Jan  2 21:44:45 nas4free nmbd[2344]:   Samba server NAS4FREE is now a domain master browser for workgroup FAMILLE on subnet 192.168.0.50
    Jan  2 21:44:45 nas4free nmbd[2344]:
    Jan  2 21:44:45 nas4free nmbd[2344]:   *****
    Jan  2 21:44:45 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Received from 192.168.0.50:5353   23 nas4free._nfs._tcp.local. TXT path=/mnt/pools1/users
    Jan  2 21:44:45 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Resetting to Probing:   22 nas4free._nfs._tcp.local. SRV 0 0 2049 nas4free.local.
    Jan  2 21:44:50 nas4free transmission-daemon[2116]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:54 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Received from 192.168.0.50:5353   23 nas4free._nfs._tcp.local. TXT path=/mnt/pools1/users
    Jan  2 21:44:54 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Resetting to Probing:   22 nas4free._nfs._tcp.local. SRV 0 0 2049 nas4free.local.
    Jan  2 21:45:00 nas4free nmbd[2344]: [2013/01/02 21:45:00.065406,  0] nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
    Jan  2 21:45:00 nas4free nmbd[2344]:   *****
    Jan  2 21:45:00 nas4free nmbd[2344]:
    Jan  2 21:45:00 nas4free nmbd[2344]:   Samba name server NAS4FREE is now a local master browser for workgroup FAMILLE on subnet 192.168.0.50
    Jan  2 21:45:00 nas4free nmbd[2344]:
    Jan  2 21:45:00 nas4free nmbd[2344]:   *****
    Jan  2 21:45:10 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Received from 192.168.0.50:5353   23 nas4free._nfs._tcp.local. TXT path=/mnt/pools1/users
    Jan  2 21:45:10 nas4free mDNSResponderPosix: mDNSCoreReceiveResponse: Resetting to Probing:   22 nas4free._nfs._tcp.local. SRV 0 0 2049 nas4free.local.
    Jan  2 21:45:24 nas4free mt-daapd[2518]: Starting playlist scan
    Jan  2 21:45:26 nas4free mt-daapd[2518]: Updating playlists
    Jan  2 21:45:27 nas4free mt-daapd[2518]: Scanned 20120 songs (was 20120) in 46 seconds

Ces erreurs (lignes 166-208)

Code: Select all

 
    Jan  2 21:44:31 nas4free ntpdate: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:31 nas4free rpcbind: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free mountd[1924]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free nfsd[1937]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free chown: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free -su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free _su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:33 nas4free transmission-remote: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free kernel: ada2
    Jan  2 21:44:36 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free proftpd: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free proftpd[2241]: nas4free.famille - ProFTPD 1.3.4b (maint) (built Tue Jan 1 2013 20:34:11 CET) standalone mode STARTUP
    Jan  2 21:44:36 nas4free pdbedit: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:36 nas4free last message repeated 3 times
. . . 
    Jan  2 21:44:37 nas4free nmbd[2344]:   become_domain_master_browser_bcast: querying subnet 192.168.0.50 for domain master browser on workgroup FAMILLE
    Jan  2 21:44:37 nas4free smbd[2347]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free sshd: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free cron: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Firefly Version svn-1696: Starting with debuglevel 2
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Plugin loaded: ssc-ffmpeg/svn-1696
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Plugin loaded: rsp/svn-1696
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Plugin loaded: daap/svn-1696
    Jan  2 21:44:37 nas4free mt-daapd[2517]: Starting signal handler
    Jan  2 21:44:37 nas4free mt-daapd[2518]: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:37 nas4free mt-daapd[2518]: Initializing database
    Jan  2 21:44:37 nas4free lighttpd[2590]: (log.c.166) server started
    Jan  2 21:44:38 nas4free id: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
. . .
    Jan  2 21:44:39 nas4free login: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:32 nas4free su: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:39 nas4free login: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''
    Jan  2 21:44:39 nas4free login: login on ttyv0 as root
    Jan  2 21:44:39 nas4free -tcsh: NSSWITCH(nslexer): /etc/nsswitch.conf line 11: syntax error at ''

l'air très étrange et je ne suis pas sûr pourquoi vous les obtenez. Même si ce n'est pas une urgence, je le porter à l'attention des développeurs, ils peuvent avoir une meilleure idée de ce que peut provoquer ce problème.

Bonne chance,
Al

Post by **velivole18** » 02 Jan 2013 22:49

Hi,

Maybe I may reinstall completely my server with this new version, without passing by the update ? Is it a good idea or no ? Just to see what happend ?
Cordially.

al562 · Post by **al562** » 02 Jan 2013 23:00

Permettez-moi de me corriger. Après plus de tests que je vois les erreurs sur mon VM.
Il en est d'autres.
Zoon1 se penche sur la question déjà. S'il vous plaît suivez les nouvelles:
Re: NAS4Free 9.1.0.1.605 Released (FreeBSD 9.1-RELEASE)

En attendant, je vous recommande d'aller retour à la version précédente.

Merci,
Al

Post by **velivole18** » 05 Jan 2013 15:26

Hi,

Every my problems are solved with version 608 !
No problem now.
Thank you very much, specially for Al !!!
Cordially.

al562 · Post by **al562** » 05 Jan 2013 18:11

Heureux que ça fonctionne bien maintenant.
Vous êtes les bienvenus.

Al

XigmaNAS

Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 605)

Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 605)

Re: Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 6

Re: Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 6

Re: Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 6

Re: Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 6

Re: Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 6

Re: Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 6

Re: Pb avec nouvelle version 9.1.0.1 - Sandstorm (revision 6