Procedure from 9.0 to 9.1

[pjdw]

Hi All
I have an embedded install and like to update to 9.1 (605).
My firmware update screen looks like this:

update nas.png

Looks like i can only update to latest 9.0 version via firmware update
Is it safe to download 9.1 and use this image?
Just to be safe because i have installed some additional packages for sabnzbd

NB I have access to my system with keyboard and possibility to run disks

Thanks for help in advance

[raulfg3]

Is safe , And I do not have notices of failling upgrades execept when energy power-down in the middle of the process, so I recomend that you use a UPS to avoid problems.

PD: It´s not posible to upgrade using *.img, you need to upgrade from *.ISO

Upgrade procedure is as simple as download latest 9.1 ISO, ( or live USB) burn on CD ( Or in USB in case of live USB), boot from this CD (or USB), and choose option to upgrade Nas4Free, N4F copy necesary files and maintain your installed packages.

PD2: Keep in mind that 9.1 is newer than 9.0 and some packages where updated (eg: PHP) so if some of your installed apps use this packages (eg: PHP), perhaps some of your apps do not works, and you need to reinstall.

To avoid this problems in future, from Forums recomened to install all aditional packages inside a jail, there are a lot of HOWTO install XXX inside a jail, and because jails are inside of your data disk, you do not lose anything in case of upgrade or boot disk corruption.

[pjdw]

If got 9.1 version 573 running with embedded image from webgui. Didnot saw 605 on sourceforge. I have lost my sab, but everything else seems to be OK. Will set up a jail for new sab and own cloud . . . .
Thanks

[VenimK]

i can 't access the tabpages on the webgiu after updating to 9.1.0.1 - Sandstorm (revisie 573)

1st, there was error wrong permissions on /tmp and /var/tmp

What now ?

[raulfg3]

no, but you need to clear your browser cache, see doc or readme: viewtopic.php?f=78&t=2031