This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Support for marvel 91xx AHCI?

Post/Debate your Suggestions & Requests of XigmaNAS here. This ONLY pertains to XigmaNAS.
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Support for marvel 91xx AHCI?

Post by lindsay »

Maybe this is what it causing my marvel`s expand cards to show errors.
I am now step by step geting the discs in my storebox eSATA to be formated.

Not tested thoug if i get errors still during bootup beside wrong descriptions i get with an USB 3.0 disc i have attached

Link to the topic about the patch is here
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
al562
Advanced User
Advanced User
Posts: 210
Joined: 12 Dec 2012 08:02
Location: New Jersey, U.S.A.
Contact:
Contact al562
Status: Offline

Re: Support for marvel 91xx AHCI?

Post by al562 »

Hi Lindsey,

I do not think so, apparently this patch is already in the kernel since last year:
mav@FreeBSD Developer wrote: September 29th, 2011, 11:44 - Patch committed and merged down to 8/9-STABLE.
Regards,
Al
Top
Post Reply

Return to “Suggestions & Requests”