problems with accessing webgui to finish install

steveneddy · Post by **steveneddy** » 08 Feb 2013 23:37

I've been trying to access the webgui with the ip address given, but I get the message "web page can not be displayed" I've searched the site here but have found no related topics. I will appreciate any help. My relevant specs are: Windows 8 OS, LAN Ethernet\wifi card, latest non beta version of NAS4 free. And as a PC and network technician I've already troubleshooted my desktop computer and network; I've checked the firewall, added the ip address as a trusted site, checked router configurations, etc.

Post by **raulfg3** » 09 Feb 2013 09:32

do you configure interface NIC ?.

sometimes N4F use firewire as default NIC, and you need to select apropiate NIC.

IF your cable is connetd to your NIC , when you enter in shell menu (option 1) to change NIC, "UP" is show in the correct NIC.

rostreich · Post by **rostreich** » 10 Feb 2013 13:52

when you enter in shell menu (option 2) to change NIC, "UP" is show in the correct NIC.

Option 1 is the way to go. Option 2 is setting IPs/gateway and DNS

armandh · Post by **armandh** » 10 Feb 2013 16:10

new installs or a new NIC need steps one and two accomplished
I use DHCP as my router returns the same IP to a give mac address.
but even if it did not I would first use DHCP to get an address in a good range
then change to fixed.

after steps 1 & 2 a good IP address is displayed

Post by **raulfg3** » 11 Feb 2013 07:32

rostreich wrote:
when you enter in shell menu (option 2) to change NIC, "UP" is show in the correct NIC.
Option 1 is the way to go. Option 2 is setting IPs/gateway and DNS

ok, edited.

steveneddy · Post by **steveneddy** » 11 Feb 2013 08:38

Yes I tryed all of that, still doesn't work

Post by **raulfg3** » 11 Feb 2013 08:46

please provide more info, eg: your board, NIC used, how you configure option 1 and option 2 in shell, what explorer do you use to access to NAS, IP, Gateway & DNS of your win8. install that do you use (full or Embeded), exact version of N4F that do you use, keep in mind that is a basic that users can access to webGUI to use/manage his NAS, so access to webGUI is granted unless some config related to LAN is wrong.

rostreich · Post by **rostreich** » 11 Feb 2013 13:32

steveneddy wrote:Yes I tryed all of that, still doesn't work

CIDR 23 = 255.255.254.0
CIDR 24 = 255.255.255.0

just in case if you didn't know

But this shouldn't be the prob, when you get a DHCP Address. Tried another cable? Tried a static ip and use crossover cable directly to your Client?

XigmaNAS

problems with accessing webgui to finish install

problems with accessing webgui to finish install

Re: problems with accessing webgui to finish install

Re: problems with accessing webgui to finish install

Re: problems with accessing webgui to finish install

Re: problems with accessing webgui to finish install

Re: problems with accessing webgui to finish install

Re: problems with accessing webgui to finish install

Re: problems with accessing webgui to finish install