After upgrade from 9.1.0.1 (427) amd64 to 9.1.0.1 (636) amd64
I get this message on every restart on the NAS or restart of the rsync service: rsyncd[3563]: rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(645) [Receiver=3.0.9]
please could some
cirkit
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
rsync error: received SIGINT, SIGTERM
-
cirkit
- Starter
- Posts: 21
- Joined: 27 Jun 2012 01:33
- Location: India
- Status: Offline
-
al562
- Advanced User
- Posts: 210
- Joined: 12 Dec 2012 08:02
- Location: New Jersey, U.S.A.
- Contact:
- Status: Offline
Re: rsync error: received SIGINT, SIGTERM
Hi Cirkit,
Check all our rsync settings/options, make sure all are needed/correct. If that does not solve the problem there may be some corruption in your config file. Disable rsync and remove all configurations for it, then reconfigure rsync server/client/local from scratch.
Regards,
Al
Check all our rsync settings/options, make sure all are needed/correct. If that does not solve the problem there may be some corruption in your config file. Disable rsync and remove all configurations for it, then reconfigure rsync server/client/local from scratch.
Regards,
Al