Error: Can't get UFS ID.

[xerxex]

Hey guys.
I am werry new to this NAS and free BSD thing.

I were having a power failure the other day, and when i got my NAS4Free booted again, one of the USB drives would not mount again.
When you go to disc management, it says that the disc is Unknown or Unformatted. The drive was UFS formatted.

D_M.png

When I try to mount it I get this message

D_M_E.png

If i set the Partition type to MBR i get this message
/dev/da0s1: Can't get UFS ID.
dumpfs: /dev/da0s1: could not read superblock to fill out disk

I have a lof of stuff on that drive, so if there is anything you can do I would be happy

[al562]

Hi Xerxex,

Welcome to the NAS4Free forum. Below is information you may find helpful.

Please read and follow the Forum Rules & Guidelines and the FAQs.
By doing so you will:

• Understand what information you should provide when you ask a question or report a problem/bug. By providing all information upfront you will get faster and better answers; that's what you want right?
• Find the answer to your problem in the FAQs or use the Advanced search to search the forum.
• Help us understand your problem and allow us to provide an accurate answer/solution without asking additional questions.
• Help the community by keeping the forum clean, focused and professional.
• Remember to use WebGUI Tab> Help|Report Generator when creating new topics/threads.
• If you have not, then please read the latest Setup & User Guide.

First we need to look for any errors. Please use WebGUI Tab> Advanced|Command and execute dmesg command. Copy and paste the resulting listing into your next post please.

Regards,
Al

[xerxex]

Thanks for replying Al..

I have done the command and here is the result:

Code: Select all

$ dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r246186M: Fri Feb  1 00:23:39 CET 2013
    root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-i386 i386
CPU: Genuine Intel(R) CPU N270   @ 1.60GHz (1594.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x106c2  Family = 6  Model = 1c  Stepping = 2
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
  AMD Features=0x100000<NX>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 1073741824 (1024 MB)
avail memory = 802664448 (765 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <091808 APIC1509>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
cryptosoft0: <software crypto> on motherboard
acpi0: <091808 RSDT1509> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x45, should be 0x42 (20110527/tbutils-282)
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcc80-0xcc87 mem 0xfe980000-0xfe9fffff,0xd0000000-0xdfffffff,0xfe940000-0xfe97ffff irq 16 at device 2.0 on pci0
agp0: <Intel 945GME SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
vgapci1: <VGA-compatible display> mem 0xfe880000-0xfe8fffff at device 2.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xdc00-0xdcff mem 0xfeaff000-0xfeafffff,0xfdef0000-0xfdefffff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x3c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:08:9b:bb:e3:39
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xec00-0xecff mem 0xfebff000-0xfebfffff,0xfdff0000-0xfdffffff irq 17 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: Chip rev. 0x3c800000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 00:08:9b:bb:e3:3a
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc880-0xc89f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc480-0xc49f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe93bc00-0xfe93bfff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcm0: <Intel ICH7 (82801GB)> port 0xc000-0xc0ff,0xc400-0xc43f mem 0xfe93b800-0xfe93b9ff,0xfe93b400-0xfe93b4ff irq 17 at device 30.2 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 11 on acpi0
uart3: <16550 or compatible> port 0x2e8-0x2ef irq 11 on acpi0
uart4: <16550 or compatible> port 0x2f0-0x2f7 irq 11 on acpi0
uart5: <16550 or compatible> port 0x2e0-0x2e7 irq 11 on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
md0: Preloaded image </mfsroot> 213909504 bytes at 0x8179c0a4
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <Western Digital> at usbus4
umass0: <WD Mass Storage Interface> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:3:0:-1: Attached to scbus3
ses0 at umass-sim0 bus 0 scbus3 target 0 lun 2
ses0: <WD SES Device 1004> Fixed Enclosure Services SCSI-4 device 
ses0: 40.000MB/s transfers
ses0: SCSI-3 SES Device
ada0 at ata0 bus 0 scbus0 target 1 lun 0
ada0: <FUJITSU MHY2040BS 0000010C> ATA-8 SATA 1.x device
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 38154MB (78140160 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad1
ada1 at ata1 bus 0 scbus1 target 1 lun 0
ada1: <ELITE PRO CF CARD 16GB Ver2.19K> ATA-0 device
ada1: 100.000MB/s transfers (UDMA5, PIO 512bytes)
ada1: 15391MB (31522176 512 byte sectors: 16H 63S/T 16383C)
cd0 at umass-sim0 bus 0 scbus3 target 0 lun 1
cd0: <WD Virtual CD 1112 1004> Removable CD-ROM SCSI-4 device 
cd0: 40.000MB/s transfers
cd0: cd present [342016 x 2048 byte records]
ada1: Previously was known as ad3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <WD My Book 1112 1004> Fixed Direct Access SCSI-4 device 
SMP: AP CPU #1 Launched!
da0: 40.000MB/s transfers
da0: 1907059MB (3905656832 512 byte sectors: 255H 63S/T 243115C)
GEOM: ada1: media size does not match label.
Trying to mount root from ufs:/dev/md0 []...
bridge0: Ethernet address: 6a:43:4c:f2:68:3f
re0: link state changed to DOWN
re0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to DOWN
re1: link state changed to UP
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
ugen4.3: <JMicron> at usbus4
umass1: <Storage> on usbus4
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:4:1:-1: Attached to scbus4
da1 at umass-sim1 bus 1 scbus4 target 0 lun 0
da1: <WDC WD50 00BEVT-00A0RT0 01.0> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers
da1: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
ugen4.3: <JMicron> at usbus4 (disconnected)
umass1: at uhub4, port 2, addr 3 (disconnected)
(da1:umass-sim1:1:0:0): lost device - 0 outstanding, 1 refs
(pass5:umass-sim1:1:(da1:0:umass-sim1:1:0): passdevgonecb: devfs entry is gone
0:0): removing device entry
ugen4.3: <JMicron> at usbus4
umass1: <Storage> on usbus4
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:4:1:-1: Attached to scbus4
da1 at umass-sim1 bus 1 scbus4 target 0 lun 0
da1: <WDC WD50 00BEVT-00A0RT0 01.0> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers
da1: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)

Hope it means anything to you..

Best regards
Jonatan Knudsen

[henrymilk]

Same error here.
HD was working fine, just moved files to it and formated the backup. Muphy?
My dmesg

Code: Select all

$ dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r246186M: Fri Feb  1 00:23:39 CET 2013
    root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-i386 i386
CPU: Intel(R) Atom(TM) CPU D2700   @ 2.13GHz (2133.45-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x30661  Family = 6  Model = 36  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 1845719040 (1760 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  TIANO   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP/HT): APIC ID:  3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL TIANO> on motherboard
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
acpi0: reservation of 0, 4000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20d0-0x20d7 mem 0x80100000-0x801fffff irq 16 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x1000-0x101f mem 0x80020000-0x8003ffff,0x80000000-0x8001ffff,0x80040000-0x80043fff irq 16 at device 0.0 on pci1
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 00:22:4d:84:7e:4e
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x20a0-0x20bf irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2080-0x209f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2060-0x207f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2040-0x205f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x80200400-0x802007ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0x20c8-0x20cf,0x20dc-0x20df,0x20c0-0x20c7,0x20d8-0x20db,0x2020-0x202f mem 0x80200000-0x802003ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Can not get Tj(target) from your CPU, using 100C.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Can not get Tj(target) from your CPU, using 100C.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Can not get Tj(target) from your CPU, using 100C.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Can not get Tj(target) from your CPU, using 100C.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
md0: Preloaded image </mfsroot> 213909504 bytes at 0x8179c0a4
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen1.2: <Microsoft> at usbus1
ukbd0: <Microsoft Wired Keyboard 400, class 0/0, rev 1.10/1.10, addr 2> on usbus1
kbd2 at ukbd0
ugen4.2: <P Technology> at usbus4
umass0: <P Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:5:0:-1: Attached to scbus5
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST31000528AS CC49> ATA-8da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic USB Flash Disk 0.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 983MB (2015231 512 byte sectors: 64H 32S/T 983C)
 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST31000528AS CC49> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 16667606 Hz quality 1000
GEOM: da0: geometry does not match label (16h,63s != 64h,32s).
GEOM: da0: media size does not match label.
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Error 5, Retries exhausted
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Error 5, Retries exhausted
Trying to mount root from ufs:/dev/md0 []...
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 10 a2 00 00 40 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 41 40 a5 00 00 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): Error 5, Retries exhausted
(ada0:ahcich0:0:0:0): READ_DMA. ACB: c8 00 a2 00 00 40 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 51 40 a5 00 00 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_DMA. ACB: c8 00 a2 00 00 40 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 51 40 a5 00 00 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_DMA. ACB: c8 00 a2 00 00 40 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 51 40 a5 00 00 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_DMA. ACB: c8 00 a2 00 00 40 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 51 40 a5 00 00 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): Retrying command
(ada0:ahcich0:0:0:0): READ_DMA. ACB: c8 00 a2 00 00 40 00 00 00 00 10 00
(ada0:ahcich0:0:0:0): CAM status: ATA Status Error
(ada0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
(ada0:ahcich0:0:0:0): RES: 51 40 a5 00 00 00 00 00 00 00 00
(ada0:ahcich0:0:0:0): Error 5, Retries exhausted

[rrichiez]

Any luck with this I have the same error and cant seem to fix it please help....there was no response on this.

Thank you
rrichiez