Do the jail install work?

Post by **lindsay** » 31 Mar 2013 17:28

I get file not found when fetching the files

Deus_Ex · Post by **Deus_Ex** » 01 Apr 2013 00:14

More information is needed but I guess your trying to fetch lib32.txz for your 32bit Nas4free install. You only need lib32.txz if your making a jail on a 64bit Nas4free install.

Post by **lindsay** » 01 Apr 2013 19:01

nas4free:/jail/work# fetch ftp://ftp.freebsd.org/pub/FreeBSD/releases/`uname -m`/`uname -m`/`uname -r | cut -d- -f1-2`/lib32.txz
fetch: ftp://ftp.freebsd.org/pub/FreeBSD/relea ... /lib32.txz: File unavailable (e.g., file not found, no access)

nas4free:/jail/work# fetch ftp://ftp.freebsd.org/pub/FreeBSD/releases/`uname -m`/`uname -m`/`uname -r | cut -d- -f1-2`/base.txz
fetch: ftp://ftp.freebsd.org/pub/FreeBSD/relea ... 3/base.txz: File unavailable (e.g., file not found, no access)

Deus_Ex · Post by **Deus_Ex** » 01 Apr 2013 19:27

There is no FreeBSD 9.1-RC3 release on there, only 9.1-RELEASE.

Enter this instead.
fetch ftp://ftp.freebsd.org/pub/FreeBSD/relea ... E/base.txz
fetch ftp://ftp.freebsd.org/pub/FreeBSD/relea ... /lib32.txz

I'm not sure it will work though. If it doesn't you will have to go back to a version of Nas4free with FreeBSD 9.1.

Post by **lindsay** » 02 Apr 2013 12:06

Do not work eighter

Post by **raulfg3** » 02 Apr 2013 12:23

revise that you have gateway and DNS setup correctly.

Can yo ping to google? ping www.google.com ????

Post by **lindsay** » 02 Apr 2013 16:48

PING www.google.com (173.194.71.106) from 192.168.0.5: 56 data bytes
64 bytes from 173.194.71.106: icmp_seq=0 ttl=46 time=27.658 ms
64 bytes from 173.194.71.106: icmp_seq=1 ttl=46 time=26.564 ms
64 bytes from 173.194.71.106: icmp_seq=2 ttl=46 time=27.881 ms

--- www.google.com ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 26.564/27.368/27.881/0.576 ms

fsbruva · Post by **fsbruva** » 02 Apr 2013 19:02

Deus_Ex wrote:If it doesn't you will have to go back to a version of Nas4free with FreeBSD 9.1.

Umm.... this indicates you are a little unclear of the concept. FreeBSD 9.1-RELEASE comes after 9.1-RC3. RC stands for release candidate. So, 9.1 went through three versions of release candidates (RC1- RC3) before 9.1 was finally ready to roll out as a final release.

What you should have said is: If this doesn't work, then you will have to upgrade Nas4Free to the latest version, which runs FreeBSD 9.1-RELEASE.

Post by **raulfg3** » 02 Apr 2013 22:44

lindsay wrote:PING http://www.google.com (173.194.71.106) from 192.168.0.5: 56 data bytes
64 bytes from 173.194.71.106: icmp_seq=0 ttl=46 time=27.658 ms
64 bytes from 173.194.71.106: icmp_seq=1 ttl=46 time=26.564 ms
64 bytes from 173.194.71.106: icmp_seq=2 ttl=46 time=27.881 ms

--- http://www.google.com ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 26.564/27.368/27.881/0.576 ms

OK, please post your N4F version and architecture (x86 or x64), and try one more time, perhaps is a transient error

Post by **lindsay** » 02 Apr 2013 22:52

Sorry i see now what the error is as i run 531 not 636 wich is the latest

XigmaNAS

Do the jail install work?

Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?

Re: Do the jail install work?