This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

S.M.A.R.T errors wich is not there?

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

S.M.A.R.T errors wich is not there?

Post by lindsay »

I have a setup with 9 RED western digital.
When i run smart test it sometimes give smart error on compleatly different discs.

I have read that if there is activity on the disc it may in some cases give an faulty test with S.M.A.R.T

I can`t belive that 4-5 out of 9 almost new hdd`s is gone.

I guess that it fails now as i am transfering content to the pools
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
Jtcdesigns
Starter
Starter
Posts: 28
Joined: 05 Apr 2013 02:04
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by Jtcdesigns »

Have you tried checking each disk separately? As in adding them as separate drives then seeing how it goes? Its not uncommon for drives to go or be bad even if new. I've ordered seagates a bulk of 12 and one ended up going bad after I copied data to it.
Top
User avatar
shakky4711
Advanced User
Advanced User
Posts: 273
Joined: 25 Jun 2012 08:27
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by shakky4711 »

Hello,

Please provide more hardware information and how the disks are conected (controller/card) and inform us which errors SMART reports.

Shakky
Top
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by lindsay »

I am going to do so.
Maybe i set some wrong values when i enabled smart
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by lindsay »

This is what i get in the log

Code: Select all

Apr 21 23:09:03	nas4free	smartd[11835]: Device: /dev/ada4, FAILED SMART self-check. BACK UP DATA NOW!
Apr 21 23:09:03	nas4free	smartd[11835]: Device: /dev/ada5, FAILED SMART self-check. BACK UP DATA NOW!
Apr 21 23:39:03	nas4free	smartd[11835]: Device: /dev/ada1, FAILED SMART self-check. BACK UP DATA NOW!

A email is like this

TEST EMAIL from smartd for device: /dev/ada0

Device info:
WDC WD20EFRX-68AX9N0, S/N:WD-WMC300225568, WWN:5-0014ee-6ad883409, FW:80.00A80, 2.00 TB

For details see host's SYSLOG. smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD20EFRX-68AX9N0
Serial Number: WD-WMC300225568
LU WWN Device Id: 5 0014ee 6ad883409
Firmware Version: 80.00A80
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Apr 21 16:08:53 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (25320) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 256) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 174 021 Pre-fail Always - 4250
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 102
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 2936
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 82
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 48
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 53
194 Temperature_Celsius 0x0022 122 116 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2920 -
# 2 Extended offline Completed without error 00% 2822 -
# 3 Extended offline Completed without error 00% 2758 -
# 4 Extended offline Completed without error 00% 2735 -
# 5 Extended offline Completed without error 00% 2711 -
# 6 Short offline Completed without error 00% 2684 -
# 7 Short offline Completed without error 00% 2659 -
# 8 Extended offline Completed without error 00% 1004 -
# 9 Extended offline Completed without error 00% 980 -
#10 Extended offline Completed without error 00% 956 -
#11 Extended offline Completed without error 00% 632 -
#12 Short offline Completed without error 00% 32 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by lindsay »

/dev/ada4 and 5 is a part of a raidz wich i can format and destroy.
Data wich was there is moved/copy to a healthy raidz

/dev/ada3 seems to be fine so i can replace it with maybe /dev/ada1?
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
ku-gew
Advanced User
Advanced User
Posts: 172
Joined: 29 Nov 2012 09:02
Location: Den Haag, The Netherlands
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by ku-gew »

You get errors in ada1,4,5 and you give us the log of ada0??
Please post the log of ada1,4,5!!
HP Microserver N40L, 8 GB ECC, 2x 3TB WD Red, 2x 4TB WD Red
XigmaNAS stable branch, always latest version
SMB, rsync
Top
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by lindsay »

/dev/ada5

Code: Select all

Device: /dev/ada5, FAILED SMART self-check. BACK UP DATA NOW!

Device info:
WDC WD20EFRX-68AX9N0, S/N:WD-WMC300505790, WWN:5-0014ee-6ad883343, FW:80.00A80, 2.00 TB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent. smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red (AF)
Device Model:     WDC WD20EFRX-68AX9N0
Serial Number:    WD-WMC300505790
LU WWN Device Id: 5 0014ee 6ad883343
Firmware Version: 80.00A80
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Apr 21 16:09:02 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
Error SMART Status command failed
Please get assistance from
http://smartmontools.sourceforge.net/
Register values returned from SMART Status command are:
CMD=0xb0
FR =0xda
NS =0x00
SC =0x00
CL =0x00
CH =0x00
RETURN =0x0000
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
No failed Attributes found.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (27120) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 274) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x70bd) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   175   173   021    Pre-fail  Always       -       4216
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       88
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2913
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       68
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       38
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       49
194 Temperature_Celsius     0x0022   114   104   000    Old_age   Always       -       33
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   199   000    Old_age   Always       -       3
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2899         -
# 2  Extended offline    Completed without error       00%      2764         -
# 3  Extended offline    Completed without error       00%      2754         -
# 4  Extended offline    Completed without error       00%      2741         -
# 5  Extended offline    Completed without error       00%      2730         -
# 6  Extended offline    Completed without error       00%      2717         -
# 7  Extended offline    Completed without error       00%      2706         -
# 8  Extended offline    Completed without error       00%      2693         -
# 9  Extended offline    Completed without error       00%      2682         -
#10  Short offline       Completed without error       00%      2664         -
#11  Short offline       Completed without error       00%      2640         -
#12  Extended offline    Completed without error       00%       996         -
#13  Extended offline    Completed without error       00%       972         -
#14  Extended offline    Completed without error       00%       948         -
#15  Extended offline    Completed without error       00%       632         -
#16  Short offline       Completed without error       00%        33         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/dev/ada4

Code: Select all

Device: /dev/ada4, FAILED SMART self-check. BACK UP DATA NOW!

Device info:
WDC WD20EFRX-68AX9N0, S/N:WD-WMC300287480, WWN:5-0014ee-6ad882e5d, FW:80.00A80, 2.00 TB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent. smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red (AF)
Device Model:     WDC WD20EFRX-68AX9N0
Serial Number:    WD-WMC300287480
LU WWN Device Id: 5 0014ee 6ad882e5d
Firmware Version: 80.00A80
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Apr 21 16:08:56 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
Error SMART Status command failed
Please get assistance from
http://smartmontools.sourceforge.net/
Register values returned from SMART Status command are:
CMD=0xb0
FR =0xda
NS =0xcd63
SC =0xbb
CL =0x9e
CH =0x7f
RETURN =0x0000
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
No failed Attributes found.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (26640) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 269) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x70bd) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   174   173   021    Pre-fail  Always       -       4266
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       88
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2914
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       72
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       39
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       48
194 Temperature_Celsius     0x0022   118   108   000    Old_age   Always       -       29
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2899         -
# 2  Extended offline    Interrupted (host reset)      10%      2764         -
# 3  Extended offline    Completed without error       00%      2754         -
# 4  Extended offline    Completed without error       00%      2741         -
# 5  Extended offline    Completed without error       00%      2730         -
# 6  Extended offline    Completed without error       00%      2717         -
# 7  Extended offline    Completed without error       00%      2707         -
# 8  Extended offline    Completed without error       00%      2694         -
# 9  Extended offline    Interrupted (host reset)      10%      2682         -
#10  Short offline       Completed without error       00%      2665         -
#11  Short offline       Completed without error       00%      2641         -
#12  Short offline       Completed without error       00%       991         -
#13  Short offline       Completed without error       00%       967         -
#14  Short offline       Completed without error       00%       943         -
#15  Extended offline    Completed without error       00%       634         -
#16  Short offline       Completed without error       00%        34         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/dev/ada1

Code: Select all

Device: /dev/ada1, FAILED SMART self-check. BACK UP DATA NOW!

Device info:
WDC WD20EFRX-68AX9N0, S/N:WD-WMC301112406, WWN:5-0014ee-058da3514, FW:80.00A80, 2.00 TB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent. smartctl 6.0 2012-10-10 r3643 [FreeBSD 9.1-RELEASE amd64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red (AF)
Device Model:     WDC WD20EFRX-68AX9N0
Serial Number:    WD-WMC301112406
LU WWN Device Id: 5 0014ee 058da3514
Firmware Version: 80.00A80
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Apr 21 16:08:54 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
Error SMART Status command failed
Please get assistance from
http://smartmontools.sourceforge.net/
Register values returned from SMART Status command are:
CMD=0xb0
FR =0xda
NS =0x2df3
SC =0x8d
CL =0xc6
CH =0xcd
RETURN =0x0000
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
No failed Attributes found.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (27240) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 275) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x70bd) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   173   173   021    Pre-fail  Always       -       4341
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       56
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       547
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       51
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       33
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       22
194 Temperature_Celsius     0x0022   122   116   000    Old_age   Always       -       25
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       529         -
# 2  Extended offline    Completed without error       00%       432         -
# 3  Extended offline    Completed without error       00%       387         -
# 4  Extended offline    Completed without error       00%       363         -
# 5  Extended offline    Completed without error       00%       339         -
# 6  Extended offline    Completed without error       00%       315         -
# 7  Short offline       Completed without error       00%       293         -
# 8  Short offline       Completed without error       00%       268         -
# 9  Extended offline    Completed without error       00%       247         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Re: S.M.A.R.T errors wich is not there?

Post by lindsay »

It has to do with the brand new conntrollers as when i put them in internal SATA ports it shows PASSED in S.M.A.R.T
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
Post Reply

Return to “Hard disk & controller”