Hello,
I've successfully installed FULL OS NAS4Free, but the installation does not recognize my USB LAN adapter. Therefore, configuration of LAN adapter (option 1 in the start menu) and configuration of IP address (option 2 in the start menu) does not work.
The USB LAN adapter was recognized without problems by Ubuntu Server 12.04 LTS which was previously installed on the hardware.
Anyone can help?
Thank you,
JohnnyW
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
USB 2.0 Network Adapter not recognized
-
JohnnyW
- NewUser
- Posts: 1
- Joined: 17 Apr 2013 08:41
- Status: Offline
-
danic
- Starter
- Posts: 30
- Joined: 26 Jun 2012 21:07
- Status: Offline
Re: USB 2.0 Network Adapter not recognized
Please post information about your USB LAN adapter. Brand/Model.
Also try going to option 6) Shell and type in 'ifconfig' (without quotes)
Do you have any network interfaces that start with anything other than "lo0:" ?
Also try going to option 6) Shell and type in 'ifconfig' (without quotes)
Do you have any network interfaces that start with anything other than "lo0:" ?
Danic
Nas4Free - AMD X4 960T - GIGABYTE 990FXA-UD3 - 16GB RAM - IBM M1015/IT - Intel RS2WC080/IT- 6x 3TB - 4x 320GB - 3x 640GB - 120GB SSD - 240GB SSD
Nas4Free - AMD X4 960T - GIGABYTE 990FXA-UD3 - 16GB RAM - IBM M1015/IT - Intel RS2WC080/IT- 6x 3TB - 4x 320GB - 3x 640GB - 120GB SSD - 240GB SSD