Nas4free problem

abhaya.micro · Post by **abhaya.micro** » 13 Jun 2013 09:47

Hi Team,
I am using nas4free 9.1.0.1 in our tv channel as online storage of video ingest. suddenly it has rebooted and started rebuilding. after rebuilding of 41 percent some errors are comming. And the geom raid5 status changed to DEGRADED. Please give me some solution. Bcoz i have data of 7 months in it.

Post by **b0ssman** » 13 Jun 2013 09:53

it sounds like some faulty hardware. but you provides to little information.

has a hd failed?

have you run memtest?

etc..

and you should still be able to accsess a raid5 in degraded state.

abhaya.micro · Post by **abhaya.micro** » 13 Jun 2013 10:08

Still I can access raid volume and i am now taking backup of data. And the nas4free server is in rebulding state now. i dont have ran memtest. how to test this command i dont know.

abhaya.micro · Post by **abhaya.micro** » 13 Jun 2013 10:11

when i am accessing a large directory, then suddenly the server is rebooting. But when i am accessing directory having small size data then its possible to copy through network.....Please help me out......

Post by **b0ssman** » 13 Jun 2013 10:29

run a memtest for several passes

http://www.memtest.org/

abhaya.micro · Post by **abhaya.micro** » 13 Jun 2013 11:10

ok i will try.......i have some doubt on it. if i am booting memtest from usb then it will effect the configuration of nas4free or not.

Post by **raulfg3** » 13 Jun 2013 11:35

please read Wiki (FAQ):

http://wiki.nas4free.org/doku.php?id=faq:0001

XigmaNAS

Nas4free problem

Nas4free problem

Re: Nas4free problem

Re: Nas4free problem

Re: Nas4free problem

Re: Nas4free problem

Re: Nas4free problem

Re: Nas4free problem