This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Nice to know - Loadbalancing in windows 7

CIFS/SMB network sharing.
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Nice to know - Loadbalancing in windows 7

Post by lindsay »

Make loadbalance in windows 7

Requirements 2 network cards

Start regedit

Make a new DWORD (32-bit) value in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\NetBT\Parameters

Create the name RandomAdapter with the value 1

Close

Change the metric values on your cards, the main card has to have a lower value then the second.
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
Post Reply

Return to “CIFS/SMB (Samba)”