This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Frage zum Upgrade von 636 auf 775

German community

Moderators: b0ssman, apollo567, Princo, crowi

Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
crowi
Forum Moderator
Forum Moderator
Posts: 1176
Joined: 21 Feb 2013 16:18
Location: Munich, Germany
Status: Offline

Frage zum Upgrade von 636 auf 775

Post by crowi »

Hallo Leute,

ich möchte mein System von v636 auf v775 upgraden, nun eine blöde Frage:
Bleiben die Einstellungen erhalten und/oder kann ich die gesicherte Config einfach zurückspielen, ohne daß es Probleme gibt?

Ich habe eine Full-Installation, ohne weitere Add-ons ausser ZFS kerneltune.

Thanx 4 your help!

Crowi
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Frage zum Upgrade von 636 auf 775

Post by b0ssman »

hier ist das best practice für upgrades

http://www.wiki.nas4free.org/doku.php?id=faq:0041

frage: wozu hast du ein full install wenn du es nicht brauchst?
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

User avatar
crowi
Forum Moderator
Forum Moderator
Posts: 1176
Joined: 21 Feb 2013 16:18
Location: Munich, Germany
Status: Offline

Re: Frage zum Upgrade von 636 auf 775

Post by crowi »

Hallo b0ssman,

dankeschön, das hatte ich schon gelesen, leider steht da nicht explizit, daß die Konfiguration erhalten bleibt,
aber ich gehe jetzt mal davon aus, dass sie es tut. :|

Ich habe die 'Full' gewählt, weil ich
a) noch eine SSD dafür übrig hatte
b) weil mir die 'embedded' 256 MB RAM für die RAMdisk abzwackt
c) ich keinen USB Stick dauerhaft im Gehäuse stecken haben möchte (na klar, man kann ihn auch innen reinlegen) :)
und d) weil ich bisher (ausser dem einfacheren Firmwareupdate) kein überzeugendes Argument für eine Embedded gefunden habe.

Cheers und nochmal danke für die schnelle Antwort,

Crowi
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded

Post Reply

Return to “Deutsch”