Hi everybody
I have a device with 2 Raid 1. Each Raid is a target and has its own NIC assigned (IP and Port)
Each Target has it's own target number.
I have activated Chap authentication for both Targets.
I can connect target 1 without issues, but target 2, will always give an authentication error, even tough, settings are on both targets the same, except, the target number.
Is there anything I am missing?
Targets
Extent Name Path Size
extent0 /dev/mirror/RAID1 Auto
extent1 /dev/mirror/RAID2 Auto
Extents must be defined before they can be used, and extents cannot be used more than once.
Target Name Flags LUNs PG IG AG
iqn.2007-09.jp.ne.peach.istgt:disk0 rw LUN0=/dev/mirror/RAID1 1,1 1,1 none
iqn.2007-09.jp.ne.peach.istgt:disk1 rw LUN0=/dev/mirror/RAID2 2,2 2,2 none
Portal Group
Tag Portals Comment
1 192.168.1.248:3260 Server1
2 192.168.1.247:3260 Server2
Initiator Group Tag Initiators Networks Comment
1 ALL 192.168.1.0/24 Server1
2 ALL 192.168.1.0/24 Server2
Auth Group Tag CHAP Users Mutual CHAP Users Comment
1 admin
Server1
2 admin
Server2
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
CHAP Authentication Problem with multible Targets
-
advantum
- NewUser
- Posts: 1
- Joined: 12 Jul 2013 09:48
- Status: Offline