new config

[agrash95]

bonjour a tous
j'aurais voulu savoir si mon nas est bien configurer je vous poste le recape des tests des 15 jours
je pige rien a ce recape
merci a vous

Version:
--------
9.1.0.1

Revision:
---------
775

Platform:
---------
x64-embedded

System bios:
------------
LINES="24"
autoboot_delay="3"
bootfile="kernel"
comconsole_pcidev=""
comconsole_port="1016"
comconsole_speed="9600"
console="vidconsole"
currdev="disk0s1a:"
hint.acpi.0.oem="ACPIAM"
hint.acpi.0.revision="1"
hint.acpi.0.rsdp="1031264"
hint.acpi.0.rsdt="0xdff80000"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atrtc.0.at="isa"
hint.atrtc.0.irq="8"
hint.atrtc.0.port="0x70"
hint.attimer.0.at="isa"
hint.attimer.0.irq="0"
hint.attimer.0.port="0x40"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.fd.1.at="fdc0"
hint.fd.1.drive="1"
hint.fdc.0.at="isa"
hint.fdc.0.drq="2"
hint.fdc.0.irq="6"
hint.fdc.0.port="0x3F0"
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.sc.0.at="isa"
hint.sc.0.flags="0x100"
hint.uart.0.at="isa"
hint.uart.0.flags="0x10"
hint.uart.0.irq="4"
hint.uart.0.port="0x3F8"
hint.uart.1.at="isa"
hint.uart.1.irq="3"
hint.uart.1.port="0x2F8"
hint.wbwd.0.at="isa"
hw.est.msr_info="0"
hw.hptrr.attach_generic="0"
interpret="OK"
kern.cam.boot_delay="8000"
kern.maxfiles="65536"
kern.maxfilesperproc="50000"
kernel="kernel"
kernel_options=""
kernelname="/boot/kernel/kernel"
loaddev="disk0s1a:"
loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local"
mac_ifoff="NO"
module_path="/boot/kernel;/boot/modules"
nas4free.vmguest="0"
smbios.bios.reldate="06/25/2008"
smbios.bios.vendor="American Megatrends Inc."
smbios.bios.version="1203 "
smbios.chassis.maker="Chassis Manufacture"
smbios.chassis.serial="Chassis Serial Number"
smbios.chassis.tag="Asset-1234567890"
smbios.chassis.version="Chassis Version"
smbios.memory.enabled="4194304"
smbios.planar.maker="ASUSTeK Computer INC."
smbios.planar.product="P5KC"
smbios.planar.serial="MS1C85BC0V00939"
smbios.planar.version="Rev 1.xx"
smbios.socket.enabled="1"
smbios.socket.populated="1"
smbios.system.maker="System manufacturer"
smbios.system.product="P5KC"
smbios.system.serial="System Serial Number"
smbios.system.uuid="80ff001e-8c00-014b-7767-0022150fbce6"
smbios.system.version="System Version"
smbios.version="2.4"
vfs.zfs.prefetch_disable="1"
kern.devalias.ada0="ad4"
kern.devalias.ada1="ad6"
kern.devalias.ada2="ad8"
kern.devalias.ada3="ad10"

System uptime:
--------------
8:00AM up 8 days, 18:03, 1 user, load averages: 0.00, 0.00, 0.00

Interfaces:
-----------
age0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
ether 00:22:15:0f:bc:e6
inet 192.168.0.24 netmask 0xffffff00 broadcast 192.168.0.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 1000baseT <full-duplex>
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xb
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

Routing tables:
---------------
Routing tables

Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.254 UGS 0 23853 age0
127.0.0.1 link#11 UH 0 0 lo0
192.168.0.0/24 link#5 U 0 578700 age0
192.168.0.24 link#5 UHS 0 0 lo0

Internet6:
Destination Gateway Flags Netif Expire
::1 link#11 UH lo0
fe80::%lo0/64 link#11 U lo0
fe80::1%lo0 link#11 UHS lo0
ff01::%lo0/32 ::1 U lo0
ff02::%lo0/32 ::1 U lo0

Firewall:
---------
65535 131620179 126151078606 Mon Jul 15 07:59:50 2013 allow ip from any to any

Processes:
----------
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 11 395.7 0.0 0 64 ?? RL 6Jul13 49088:07.40 [idle]
root 2626 2.9 3.0 530968 117968 ?? S 7Jul13 1159:04.23 /usr/local/bin/fuppesd --config-file /var/etc/fuppes.cfg --log-level 2 --log-file /var/log/fuppes.log --plugin-dir /usr/local/lib/fuppes --friendly-name NAS4Free (%h) --database-file /mnt/pool//fuppes.db
root 0 0.0 0.1 0 2512 ?? DLs 6Jul13 13:17.66 [kernel]
root 1 0.0 0.0 6276 624 ?? ILs 6Jul13 0:00.00 /sbin/init --
root 2 0.0 0.0 0 16 ?? DL 6Jul13 0:00.00 [crypto]
root 3 0.0 0.0 0 16 ?? DL 6Jul13 0:00.00 [crypto returns]
root 4 0.0 0.0 0 16 ?? DL 6Jul13 0:00.00 [ctl_thrd]
root 5 0.0 0.0 0 80 ?? DL 6Jul13 0:42.68 [zfskern]
root 6 0.0 0.0 0 16 ?? DL 6Jul13 0:00.00 [sctp_iterator]
root 7 0.0 0.0 0 16 ?? DL 6Jul13 0:00.00 [xpt_thrd]
root 8 0.0 0.0 0 16 ?? DL 6Jul13 0:00.04 [md0]
root 9 0.0 0.0 0 16 ?? DL 6Jul13 0:00.46 [pagedaemon]
root 10 0.0 0.0 0 16 ?? DL 6Jul13 0:00.00 [audit]
root 12 0.0 0.0 0 288 ?? WL 6Jul13 15:10.36 [intr]
root 13 0.0 0.0 0 48 ?? DL 6Jul13 1:05.47 [geom]
root 14 0.0 0.0 0 16 ?? DL 6Jul13 0:27.98 [yarrow]
root 15 0.0 0.0 0 512 ?? DL 6Jul13 0:18.43 [usb]
root 16 0.0 0.0 0 16 ?? DL 6Jul13 0:00.00 [vmdaemon]
root 17 0.0 0.0 0 16 ?? DL 6Jul13 0:00.01 [pagezero]
root 18 0.0 0.0 0 16 ?? DL 6Jul13 0:02.29 [bufdaemon]
root 19 0.0 0.0 0 16 ?? DL 6Jul13 0:02.33 [vnlru]
root 20 0.0 0.0 0 16 ?? DL 6Jul13 4:21.64 [syncer]
root 21 0.0 0.0 0 16 ?? DL 6Jul13 0:02.55 [softdepflush]
root 1068 0.0 0.0 0 16 ?? DL 6Jul13 0:00.38 [md1]
root 1251 0.0 0.0 12052 1824 ?? Is 6Jul13 0:00.01 dhclient: age0 [priv] (dhclient)
_dhcp 1295 0.0 0.0 12052 1876 ?? Is 6Jul13 0:00.28 dhclient: age0 (dhclient)
root 1385 0.0 0.0 6280 720 ?? Is 6Jul13 0:00.00 /sbin/devd
root 1516 0.0 0.0 12080 1716 ?? Ss 6Jul13 0:00.62 /usr/sbin/syslogd -8 -ss -f /var/etc/syslog.conf
root 1756 0.0 0.2 65412 6864 ?? Ss 6Jul13 0:05.44 /usr/local/sbin/nmbd -D -s /var/etc/smb.conf
root 1759 0.0 0.3 74212 10228 ?? Is 6Jul13 0:00.26 /usr/local/sbin/smbd -D -s /var/etc/smb.conf
root 1785 0.0 0.3 74212 10748 ?? I 6Jul13 0:00.69 /usr/local/sbin/smbd -D -s /var/etc/smb.conf
root 1831 0.0 0.0 14128 1808 ?? Ss 6Jul13 0:00.45 /usr/sbin/cron -s
root 1957 0.0 0.1 35244 4952 ?? S 6Jul13 0:06.69 /usr/local/sbin/lighttpd -f /var/etc/lighttpd.conf -m /usr/local/lib/lighttpd
root 2661 0.0 0.0 9912 1876 ?? Is 7Jul13 0:00.04 /usr/local/bin/mDNSResponderPosix -b -f /var/etc/mdnsresponder.conf
root 2922 0.0 0.4 81876 15768 ?? I Thu06AM 0:10.08 /usr/local/sbin/smbd -D -s /var/etc/smb.conf
root 3076 0.0 0.0 14128 1840 ?? S 8:00AM 0:00.00 cron: running job (cron)
root 3077 0.0 0.4 79936 16496 ?? Ss 8:00AM 0:00.02 /usr/local/bin/php-cgi -f /etc/mail/sendreport
root 3086 0.0 0.0 14188 1796 ?? R 8:00AM 0:00.00 ps xauww
root 2129 0.0 0.1 41164 2252 v0 Is 6Jul13 0:00.00 login [pam] (login)
root 2132 0.0 0.1 14476 3092 v0 I 6Jul13 0:00.01 -tcsh (csh)
root 2141 0.0 0.1 14504 2640 v0 I+ 6Jul13 0:00.00 /bin/sh /etc/rc.initial
root 2130 0.0 0.0 12052 1640 v1 Is+ 6Jul13 0:00.00 /usr/libexec/getty Pc ttyv1
root 2131 0.0 0.0 12052 1640 v2 Is+ 6Jul13 0:00.00 /usr/libexec/getty Pc ttyv2

Memory:
-------
Mem: 64M Active, 91M Inact, 856M Wired, 18M Buf, 2702M Free

Swap usage:
-----------
Device 512-blocks Used Avail Capacity

ZFS pool list:
--------------
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
pool 7.25T 1.15T 6.10T 15% 1.00x ONLINE -

ZFS pool status:
----------------
pool: pool
state: ONLINE
scan: none requested
config:

NAME STATE READ WRITE CKSUM
pool ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ada0 ONLINE 0 0 0
ada1 ONLINE 0 0 0
ada2 ONLINE 0 0 0
ada3 ONLINE 0 0 0

errors: No known data errors

ATA disk:
---------
atacontrol:
ATA_CAM option is enabled in kernel.
Please use camcontrol instead.

SCSI disk:
----------
<WDC WD20EZRX-00DC0B0 80.00A80> at scbus0 target 0 lun 0 (ada0,pass0)
<WDC WD20EZRX-00DC0B0 80.00A80> at scbus1 target 0 lun 0 (ada1,pass1)
<WDC WD20EZRX-00DC0B0 80.00A80> at scbus2 target 0 lun 0 (ada2,pass2)
<WDC WD20EZRX-00DC0B0 80.00A80> at scbus3 target 0 lun 0 (ada3,pass3)
<Kingston DT Mini Fun G2 1.00> at scbus5 target 0 lun 0 (pass4,da0)

S.M.A.R.T. [/dev/ada0]:
-----------------------
smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, http://www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF, SATA 6Gb/s)
Device Model: WDC WD20EZRX-00DC0B0
Serial Number: WD-WMC1T0770554
LU WWN Device Id: 5 0014ee 6582ccef3
Firmware Version: 80.00A80
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Jul 15 08:00:00 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (27240) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.

[loulnux]

RAS, tout semble fonctionner correctement après 8 jours sous tension.
Ceci dît pour répondre à ta question "est-il bien configuré", je sais que c'est un concept difficile à appréhender pour un utilisateur windows principalement mais ce type de bécane est forcément correctement configurée dès l'instant ou elle fonctionne.
En fait le système s'"AUTO"configure à chacun de ses démarrages en détectant le hardware dont il dispose.
Ce qui veut dire qu'on pourrait très bien rebrancher la clé USB sur une autre carte mère avec un autre proc d'autre mémoire et avec les mêmes disques durs et ne voir aucune différence d'exploitation.
C'est la grande force de cette solution car ça lui permet une pérennité évolutive inégalée.
Si toutefois tu avais des doutes çà et là tu peux avoir des infos ponctuelles sur les différents processus exploités en consultant "diagnostique"> "journal" et dans la page tu as un onglet par défaut "système" qui te renseignera sur les erreurs rencontrées. Attention certaines d'entre elles peuvent être de simples alertes qui font l'objet d'une auto correction ultérieure il ne faut réellement s'inquiéter que lors de récurrences sans solution apparente.
Tu pourrais travailler l'aspect smart contrôle ne serai-ce que pour avoir des alertes en cas de surchauffe d'un des disques.