There is wrong disk ID in the config. Please remove the disk

[Slowhand]

NAS4Free 9.1.0.1 (revision 775) x64-embedded
HP ProLiant Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz 8448MiB RAM

Intel 82801I (ICH9) USB controller bus=1 hubaddr=2 port=4 devaddr=2
interface=0 bus=1 hubaddr=2 port=4 devaddr=2 interface=1 BCM5722
1000BASE-T media interface Intel 82801I (ICH9) USB 2.0 controller
bus=1 hubaddr=3 port=7 devaddr=2 interface=0

---

Subject:
There is wrong disk ID in the config

---

Description:
Hi there

On upgrading to the latest firmware I for the first time received the above
error on two on the four discs in my ZFS pool. the problem discs are ada1 and
ada2, and the serial numbers of these discs is highlighted.

Note this issue was only highlighted by the change in the firmware.

I don't know if to ignore this issue -- the zfs pool seems to fine.

I do have a problem with my setup -- I am using the iscsi service as a backup
drive for another server, the connection will drop from time -- this problem is
driving me mad, but I cant see how these two would be related.

---

Code: Select all

There is wrong disk ID in the config. Please remove the disk and re-add it or
use 'clear and import'.

There is wrong disk ID in the config. Please remove the disk and re-add it or use 'clear and import'.


Disk Size Description Device model Serial number Standby time File system Status
ada0 1907730MB ST2000DL003-9VT166 CC32 ST2000DL003-9VT166 5YD28AEM Always on ZFS storage pool device ONLINE Edit disk Delete disk
ada1 1907730MB ST2000DL003-9VT166 CC32 ST2000DL003-9VT166 5YD20XKX Always on ZFS storage pool device ONLINE Edit disk Delete disk
ada2 1907730MB ST2000DL003-9VT166 CC32 ST2000DL003-9VT166 5YD2AH9E Always on ZFS storage pool device ONLINE Edit disk Delete disk
ada3 1907730MB ST2000DL003-9VT166 CC32 ST2000DL003-9VT166 5YD202M0 Always on ZFS storage pool device ONLINE Edit disk Delete disk

[raulfg3]

please use button "Clear config & Import Disk" there are no problem with this ( your pool can work without disturbing), and post result.

PD: in your original post I do not see wrong ID, please can you use colors to make it clear.

[Slowhand]

Hi there

Thanks - that fixed it, I was nervous of affecting the pool, your comment of not affecting the pool gave the confidence click the button.
It worked.