Code: Select all
CPU: AMD Phenom(tm) II X6 1045T Processor (2700.17-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100fa0 Family = 10 Model = a Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!
>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,
SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3596521472 (3429 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <7596MS A7596100>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x00000
00000000000/0x1 (20110527/tbfadt-586)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <7596MS A7596100> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0
xfeaf0000
-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1
hdac0: <ATI RS780 HDA Controller> mem 0xfeae8000-0xfeaebfff irq 19 at device 5.1
on pci1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe800-0xe8f
f mem
0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 17 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX
,
100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-
master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 6c:62:6d:e0:e9:5d
ahci0: <ATI IXP700 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000
-
0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ffc00-0xfe8fffff irq 22 at device 1
7.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 a
t device
18.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 16 at devic
e 18.1 on
pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe8ff800-0xfe8ff8ff irq
17 at
device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 a
t device
19.0 on pci0
usbus3 on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 18 at devic
e 19.1 on
pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe8ff400-0xfe8ff4ff irq
19 at
device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,
0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe8f4000-0xfe8f7fff irq 16 at device 20.
2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 a
t device
20.5 on pci0
usbus6 on ohci4
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ctl: CAM Target Layer loaded
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding
disabled,
default to accept, logging disabled
iSCSI boot driver version 0.2.6
hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC889 HDA CODEC> at cad 3 on hdac1
hdaa1: <Realtek ALC889 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC889 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hda
a1
pcm2: <Realtek ALC889 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC889 (Rear Digital)> at nid 17 on hdaa1
md0: Preloaded image </mfsroot> 232783872 bytes at 0xffffffff819a3c58
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen0.2: <NOVATEK> at usbus0
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on usbus0
kbd2 at ukbd0
uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on usbus0
ugen1.2: <vendor 0x04b3> at usbus1
ums0: <vendor 0x04b3 product 0x3107, class 0/0, rev 2.00/1.30, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen2.2: <SanDisk> at usbus2
umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.26, addr 2> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:7:0:-1: Attached to scbus7
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD20EARS-00S8B1 80.00A80> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <SanDisk Cruzer Fit 1.26> Fixed Direct Access SCSI-6 device
da0: 40.000MB/s transfers
da0: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C)
<WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad8
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD20EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad10
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 10547542 Hz quality 800
GEOM: da0s1: geometry does not match label (16h,63s != 255h,63s).
GEOM: da0s1: media size does not match label.
Trying to mount root from ufs:/dev/md0 []...
pid 1711 (pdbedit), uid 0: exited on signal 11
re0: link state changed to UP
$
