Hi guys
I've been testing N4F in a virtual environment, now i think i'm ready to build a physical machine. It will replace my QNAP 219p and back up my data that is currently on my home server. I want it to be as low power as possible but also give me good performance.
I am thinking of using an Intel Celeron G1610 cpu, with an MSI B75MA-P45 motherboard. Can you tell me if that motherboard is supported and will work out of the box?
Here is the manufacturers link
http://uk.msi.com/product/mb/B75MA-P45. ... div=Detail
I will install 8GB DDR3, 5 WD Red 2TB disks and possibly a 64GB SSD for cache.
Thanks
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
New Build - Help
-
kkd
- Forum Moderator
- Posts: 306
- Joined: 08 May 2013 21:47
- Location: Budapest, Hungary
- Contact:
- Status: Offline
Re: New Build - Help
u can try it very easily. that's why liveusb is for.
http://www.nas4free.org/general_information.html
http://wiki.nas4free.org/doku.php?id=na ... s_hardware
http://www.nas4free.org/general_information.html
http://wiki.nas4free.org/doku.php?id=na ... s_hardware
XigmaNAS x64-embedded | INTEL Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz | 9216MiB RAM | X x YTB WD Red ZFS mirror compressed
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: New Build - Help
please read this topic
http://forums.freenas.org/threads/so-yo ... ons.12276/
your hardware should work. Realtek cards are a hit and miss, but you can always buy a add in intel card.
http://forums.freenas.org/threads/so-yo ... ons.12276/
your hardware should work. Realtek cards are a hit and miss, but you can always buy a add in intel card.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.