I just got an intel H87 Motherboard with I217V Ethernet Controller. But it is not detected during the install of the latest stable build.
After a bit of searching i found out that intel already has a driver for FreeBSD 9.x and is available at the following link
https://downloadcenter.intel.com/Detail ... d&lang=eng
and there are instructions on how to compile and then configure it in FreeBSD 9.x. Can I do it the same way in N4F latest build?
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
[solved] Intel I217V Controller driver not available
-
alisarwar
- NewUser
- Posts: 1
- Joined: 01 Aug 2013 23:16
- Status: Offline
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Intel I217V Controller driver not available
the support will be in freebsd 9.2 which is scheduled for the end of the month.
then you will have to wait for a nas4free 9.2 release.
if you do a full install you can however follow the instructions.
then you will have to wait for a nas4free 9.2 release.
if you do a full install you can however follow the instructions.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Intel I217V Controller driver not available
latest N4F 9.2.0.1.925 and later do have support.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510