This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Help! Errors mounting disk and more

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
mandroid
NewUser
NewUser
Posts: 2
Joined: 08 Sep 2013 15:42
Location: South of Stockholm Sweden
Status: Offline

Help! Errors mounting disk and more

Post by mandroid »

Hi!
Its my first time I seek help here all minor problems before I have solved on my own. But have no clue where to start and what to do now. Sorry if my english is bad but I will try explain as good as possible. I got some serious problems that started after I upgraded to 9.1.0.1 - Sandstorm (revision 847). My first problem refers to one of my disks so I ask about it in this category. Never had problems with it before. Now I got some transmission errors as well but thats another story :)

I got a system with 5 disks formated in UFS and a USB with OS. After upgrade of OS I got errors on one of the disks ada1 and it had the name disk3. It could not find shares and path to it. I tried dismount it and when I try to create a mount point again I got this error:

The following input errors were detected:
•/dev/ada1p1: Can't get UFS ID.
dumpfs: /dev/ada1p1: could not read superblock to fill out disk


This is the part of the log with errors when I reboot system:
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): READ_DMA. ACB: c8 00 23 00 00 40 00 00 00 00 01 00
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): CAM status: ATA Status Error
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): RES: 51 40 23 00 00 00 00 00 00 01 00
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): Retrying command
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): READ_DMA. ACB: c8 00 23 00 00 40 00 00 00 00 01 00
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): CAM status: ATA Status Error
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): RES: 51 40 23 00 00 00 00 00 00 01 00
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): Retrying command
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): READ_DMA. ACB: c8 00 23 00 00 40 00 00 00 00 01 00
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): CAM status: ATA Status Error
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): ATA status: 51 (DRDY SERV ERR), error: 40 (UNC )
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): RES: 51 40 23 00 00 00 00 00 00 01 00
Sep 8 20:52:27 nas4free kernel: (ada1:ata3:0:1:0): Error 5, Retries exhausted
Sep 8 20:52:27 nas4free kernel: Trying to mount root from ufs:/dev/md0 []...
Sep 8 20:52:27 nas4free mountd[1715]: bad exports list line /mnt/disk3
Sep 8 20:52:27 nas4free transmission-daemon: transmission-daemon Error loading config file -- exiting. (daemon.c:498)
Sep 8 20:52:27 nas4free root: /etc/rc: WARNING: failed to start transmission
Sep 8 20:52:27 nas4free kernel: ada0 ada1 ada2
Sep 8 20:52:27 nas4free kernel: ada3 ada4

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Help! Errors mounting disk and more

Post by raulfg3 »

start booting from a new CD ( to avoid problems with mounted partitios), and fsck your disk: http://wiki.nas4free.org/doku.php?id=faq:0001

and search forum for simmilar problems: viewtopic.php?f=57&t=4847&p=25981&hilit ... +51#p25981
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

mandroid
NewUser
NewUser
Posts: 2
Joined: 08 Sep 2013 15:42
Location: South of Stockholm Sweden
Status: Offline

Re: Help! Errors mounting disk and more

Post by mandroid »

raulfg3 wrote:start booting from a new CD ( to avoid problems with mounted partitios), and fsck your disk: http://wiki.nas4free.org/doku.php?id=faq:0001

and search forum for simmilar problems: viewtopic.php?f=57&t=4847&p=25981&hilit ... +51#p25981
Thanks for the help and fast response!
Searched forums for similar problems before but just got confused. I couldn't get live cd to work but did a live usb insted. Installed the disks again and followed instructions on how to do a failcheck. After that I tried my embedded usb OS again. The failcheck didn't solve the problem. Tried to mount the disk again but still the same errors. Maybe the hdd is broken? 2TB with data hope I can find out whats wrong.

User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Status: Offline

Re: Help! Errors mounting disk and more

Post by raulfg3 »

I do not suspect from Disk, I suspect from SATA cable or external enclosure, In the past I have problem with a External e-SATA enclosure, once I conect the HD direct to motherboard with a good SATA cable with glitch ( metalic clip), problems dissapear.

PD: Perhaps is SATA cable, perhaps is other problem, but the real error is SATA related not N4F version related.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510

Post Reply

Return to “Hard disk & controller”