Last week my old FreeNAS server's HD crashed (whole different story, looks like I lost that data) so I figured this would be a good time to upgrade to NAS4Free.
An old DELL seemed the most suitable (read: 'newest') piece of hardware I had lying around:
DELL Dimension XPS R400
- Pentium II
- 384 MB RAM
- Maxtor IDE 12GB, master on first IDE channel
- HLDS (Hitachi) GCR-8481B CD-ROM, master on second IDE channel
Turns out I was wrong; it doesn't even complete booting the Live CD.
If there is a way to pause the screen or otherwise have access to dmesg's output, I haven't found it
, so I can only type the last thing I see on the screen:(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track)
(cd0:ata1:0:0:0): Info: 0x16ceb
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
So at that point, I'm figuring:
1) This is fairly deep into the booting process and reading from the CD-ROM up to that point wasn't a problem, so it's not like there's something fundamentally wrong with the hardware
2) They're all IDE devices, so for some reason this Dell wants to use SCSI-over-IDE or something?
Trying to find more clues, I put in my SystemRescueCD disk (http://www.sysresccd.org), it ALSO had issues booting, looking quite similar. Just for fun I unplug both CD-ROM drives and replace them with the unit listed above. System Rescue now boots, so then I'm thinking maybe I've solved my problem? No, of course not
. At least it gave me the opportunity to go through dmesg output - appended below (at the bottom, I'm mounting my flash drive to copy the output).Bear in mind SystemRescue is Gentoo Linux based w/r to device names, but it looks like initially everything works fine, hard disk and CD-ROM drive get recognized as ATA drives, but then they are assigned SCSI device names. The HD isn't used so it doesn't matter, but once the CD-ROM drive has become "sr" we see a bunch of failed attempts to access the device - not unlike the final dmesg lines I copied above (perhaps because the device is already in use?).
Any clues as to what's going on here, anyone?
Code: Select all
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.16-std158-i386 (root@catalyst) (gcc version 4.4.4 (Gentoo 4.4.4 p1.0) ) #3 SMP Thu Jul 8 23:01:55 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable)
[ 0.000000] BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data)
[ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000018000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffe7800 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.1 present.
[ 0.000000] last_pfn = 0x18000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000018000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0018000000 page 2M
[ 0.000000] kernel direct mapping tables up to 18000000 @ 7000-c000
[ 0.000000] RAMDISK: 03c14000 - 040dbc2c
[ 0.000000] ACPI: RSDP 000f6b70 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 040fde48 00028 (v01 PTLTD RSDT 00000000 PTL 01000000)
[ 0.000000] ACPI: FACP 040ff78c 00074 (v01 DELL KHAN 00000000 PTL 000F4240)
[ 0.000000] ACPI: DSDT 040fde70 0191C (v01 Dell Khan 00000000 MSFT 01000004)
[ 0.000000] ACPI: FACS 040ffbc0 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 384MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 18000000
[ 0.000000] low ram: 0 - 18000000
[ 0.000000] node 0 low ram: 00000000 - 18000000
[ 0.000000] node 0 bootmap 00002000 - 00005000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0018000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 0001aa7914] TEXT DATA BSS ==> [0001000000 - 0001aa7914]
[ 0.000000] #4 [0003c14000 - 00040dbc2c] RAMDISK ==> [0003c14000 - 00040dbc2c]
[ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #6 [0001aa8000 - 0001ab0170] BRK ==> [0001aa8000 - 0001ab0170]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000002000 - 0000005000] BOOTMAP ==> [0000002000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00018000
[ 0.000000] HighMem 0x00018000 -> 0x00018000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000040fd
[ 0.000000] 0: 0x00004100 -> 0x00018000
[ 0.000000] On node 0 totalpages: 98204
[ 0.000000] free_area_init_node: node 0, pgdat c1648d40, node_mem_map c1ab2000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93469 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000040fd000 - 00000000040fe000
[ 0.000000] PM: Registered nosave memory: 00000000040fe000 - 00000000040ff000
[ 0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000
[ 0.000000] PM: Registered nosave memory: 00000000040ff000 - 0000000004100000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e7fe7800)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @c2000000 s29544 r0 d23704 u4194304
[ 0.000000] pcpu-alloc: s29544 r0 d23704 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97436
[ 0.000000] Kernel command line: scandelay=1 initrd=initram.igz BOOT_IMAGE=rescuecd
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 372956k/393216k available (4628k kernel code, 19412k reserved, 1850k data, 3672k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd55000 - 0xfffff000 (2728 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd8800000 - 0xff3fe000 ( 619 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] .init : 0xc1654000 - 0xc19ea000 (3672 kB)
[ 0.000000] .data : 0xc1485088 - 0xc165392c (1850 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1485088 (4628 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 398.293 MHz processor.
[ 0.008017] Calibrating delay loop (skipped), value calculated using timer frequency.. 796.58 BogoMIPS (lpj=1593172)
[ 0.008291] Security Framework initialized
[ 0.008407] SELinux: Disabled at boot.
[ 0.008536] Mount-cache hash table entries: 512
[ 0.009258] Initializing cgroup subsys ns
[ 0.009371] Initializing cgroup subsys cpuacct
[ 0.009484] Initializing cgroup subsys devices
[ 0.009589] Initializing cgroup subsys freezer
[ 0.009687] Initializing cgroup subsys net_cls
[ 0.009884] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.010025] CPU: L2 cache: 512K
[ 0.010129] mce: CPU supports 5 MCE banks
[ 0.010295] Checking 'hlt' instruction... OK.
[ 0.024094] Checking for popad bug... OK.
[ 0.024381] SMP alternatives: switching to UP code
[ 0.046701] Freeing SMP alternatives: 23k freed
[ 0.046876] ACPI: Core revision 20090903
[ 0.053940] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.055760] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.055869] weird, boot CPU (#0) not listed by the BIOS.
[ 0.055968] SMP motherboard not detected.
[ 0.056024] Local APIC not detected. Using dummy APIC emulation.
[ 0.056127] SMP disabled
[ 0.057067] Brought up 1 CPUs
[ 0.057172] Total of 1 processors activated (796.58 BogoMIPS).
[ 0.058507] CPU0 attaching NULL sched-domain.
[ 0.059222] devtmpfs: initialized
[ 0.061980] regulator: core version 0.5
[ 0.062396] NET: Registered protocol family 16
[ 0.063060] ACPI: bus type pci registered
[ 0.064204] PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1
[ 0.064314] PCI: Using configuration type 1 for base access
[ 0.068616] bio: create slab <bio-0> at 0
[ 0.070253] ACPI: EC: Look up EC in DSDT
[ 0.078777] ACPI: Interpreter enabled
[ 0.078948] ACPI: (supports S0 S1 S5)
[ 0.079228] ACPI: Using PIC for interrupt routing
[ 0.092695] ACPI: No dock devices found.
[ 0.093801] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.094101] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.094419] pci 0000:00:07.1: reg 20 io port: [0x1460-0x146f]
[ 0.094541] pci 0000:00:07.2: reg 20 io port: [0x1440-0x145f]
[ 0.094618] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.094627] * this clock source is slow. Consider trying other clock sources
[ 0.094945] pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
[ 0.095057] pci 0000:00:07.3: quirk: region 7000-700f claimed by PIIX4 SMB
[ 0.095279] pci 0000:00:0e.0: reg 10 32bit mmio: [0xf4000000-0xf401ffff]
[ 0.095306] pci 0000:00:0e.0: reg 14 io port: [0x1478-0x147f]
[ 0.095331] pci 0000:00:0e.0: reg 18 io port: [0x1470-0x1477]
[ 0.095402] pci 0000:00:0e.0: supports D2
[ 0.095483] pci 0000:00:0f.0: reg 10 io port: [0x1000-0x10ff]
[ 0.095509] pci 0000:00:0f.0: reg 14 32bit mmio: [0xf4020000-0xf40203ff]
[ 0.095558] pci 0000:00:0f.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.095602] pci 0000:00:0f.0: supports D1 D2
[ 0.095618] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.095730] pci 0000:00:0f.0: PME# disabled
[ 0.095897] pci 0000:00:10.0: reg 10 32bit mmio pref: [0xf4020400-0xf402043f]
[ 0.095924] pci 0000:00:10.0: reg 14 32bit mmio pref: [0xf4030000-0xf403ffff]
[ 0.095950] pci 0000:00:10.0: reg 18 32bit mmio pref: [0xf4028000-0xf402ffff]
[ 0.095975] pci 0000:00:10.0: reg 1c io port: [0x1400-0x143f]
[ 0.096072] pci 0000:00:10.0: supports D2
[ 0.096089] pci 0000:00:10.0: PME# supported from D0 D2 D3hot
[ 0.096199] pci 0000:00:10.0: PME# disabled
[ 0.096423] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[ 0.096450] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff]
[ 0.096474] pci 0000:01:00.0: reg 18 32bit mmio: [0xf4100000-0xf4100fff]
[ 0.096517] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.096645] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.096665] pci 0000:00:01.0: bridge 32bit mmio: [0xf4100000-0xf5ffffff]
[ 0.096697] pci_bus 0000:00: on NUMA node 0
[ 0.096721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.100464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.101522] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.102458] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.103393] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.104345] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.104503] vgaarb: loaded
[ 0.105136] SCSI subsystem initialized
[ 0.105524] libata version 3.00 loaded.
[ 0.105963] PCI: Using ACPI for IRQ routing
[ 0.106181] Expanded resource reserved due to conflict with Adapter ROM
[ 0.106773] Switching to clocksource tsc
[ 0.113737] pnp: PnP ACPI init
[ 0.113914] ACPI: bus type pnp registered
[ 0.125591] pnp: PnP ACPI: found 11 devices
[ 0.125696] ACPI: ACPI bus type pnp unregistered
[ 0.125803] PnPBIOS: Disabled by ACPI PNP
[ 0.125974] system 00:07: ioport range 0x7000-0x700f has been reserved
[ 0.126089] system 00:07: ioport range 0x8000-0x803f has been reserved
[ 0.162167] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.162283] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.162392] pci 0000:00:01.0: MEM window: 0xf4100000-0xf5ffffff
[ 0.162501] pci 0000:00:01.0: PREFETCH window: 0x18000000-0x180fffff
[ 0.162637] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.162657] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.162676] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.162694] pci_bus 0000:01: resource 1 mem: [0xf4100000-0xf5ffffff]
[ 0.162713] pci_bus 0000:01: resource 2 pref mem [0x18000000-0x180fffff]
[ 0.162919] NET: Registered protocol family 2
[ 0.163625] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.165857] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.166609] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.167276] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.167385] TCP reno registered
[ 0.167940] NET: Registered protocol family 1
[ 0.168613] RPC: Registered udp transport module.
[ 0.168719] RPC: Registered tcp transport module.
[ 0.168817] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.169008] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.169223] pci 0000:01:00.0: Boot video device
[ 5.440721] Unpacking initramfs...
[ 12.918393] Freeing initrd memory: 4895k freed
[ 12.947302] audit: initializing netlink socket (disabled)
[ 12.947497] type=2000 audit(1378822868.944:1): initialized
[ 12.948395] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 12.960433] VFS: Disk quotas dquot_6.5.2
[ 12.960952] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.961797] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 12.966529] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 12.969128] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.971032] NTFS driver 2.1.29 [Flags: R/O].
[ 12.971927] fuse init (API version 7.13)
[ 12.973585] JFS: nTxBlock = 2955, nTxLock = 23645
[ 12.979949] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 12.983648] SGI XFS Quota Management subsystem
[ 12.985315] Btrfs loaded
[ 12.986580] aufs 2-standalone.tree-32-20100517
[ 12.986711] msgmni has been set to 738
[ 12.989187] alg: No test for stdrng (krng)
[ 12.989560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 12.989719] io scheduler noop registered
[ 12.989817] io scheduler anticipatory registered
[ 12.989915] io scheduler deadline registered
[ 12.990478] io scheduler cfq registered (default)
[ 12.991427] isapnp: Scanning for PnP cards...
[ 13.345941] isapnp: No Plug & Play device found
[ 13.357180] Linux agpgart interface v0.103
[ 13.357686] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 13.364775] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 13.365258] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 13.365612] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.367409] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.371416] loop: AES key scrubbing enabled
[ 13.371523] loop: loaded (max 8 devices)
[ 13.371878] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at 0x60,0x64 irq 1,12
[ 13.375015] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.375151] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.375955] mice: PS/2 mouse device common for all mice
[ 13.376616] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 13.376768] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 13.377774] device-mapper: uevent: version 1.0.3
[ 13.378627] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 13.378793] cpuidle: using governor ladder
[ 13.378892] cpuidle: using governor menu
[ 13.379003] No iBFT detected.
[ 13.382179] TCP cubic registered
[ 13.383825] NET: Registered protocol family 10
[ 13.387901] lo: Disabled Privacy Extensions
[ 13.390694] Mobile IPv6
[ 13.390799] NET: Registered protocol family 17
[ 13.391055] Using IPI No-Shortcut mode
[ 13.391689] PM: Resume from disk failed.
[ 13.391727] registered taskstats version 1
[ 13.392547] rtc_cmos 00:04: setting system clock to 2013-09-10 14:21:10 UTC (1378822870)
[ 13.393040] Freeing unused kernel memory: 3672k freed
[ 13.414099] Write protecting the kernel text: 4632k
[ 13.414372] Write protecting the kernel read-only data: 1420k
[ 13.420832] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 15.484148] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 15.485171] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 15.485190] PCI: setting IRQ 10 as level-triggered
[ 15.485214] tulip 0000:00:0f.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 15.485734] tulip0: MII transceiver #1 config 1000 status 7849 advertising 01e1.
[ 15.608206] eth0: ADMtek Comet rev 17 at Port 0x1000, 00:04:5a:56:2f:3d, IRQ 10.
[ 15.780679] ata_piix 0000:00:07.1: version 2.13
[ 15.789744] scsi0 : ata_piix
[ 15.794968] scsi1 : ata_piix
[ 15.795777] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1460 irq 14
[ 15.795798] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1468 irq 15
[ 15.816520] usbcore: registered new interface driver usbfs
[ 15.817302] usbcore: registered new interface driver hub
[ 15.819630] usbcore: registered new device driver usb
[ 15.862595] Floppy drive(s): fd0 is 1.44M
[ 15.880143] FDC 0 is a post-1991 82077
[ 15.967071] ata2.00: ATAPI: GCR-8481B, 1.06, max UDMA/33
[ 15.968349] ata1.00: ATA-4: Maxtor 91296D6, GAS54112, max UDMA/33
[ 15.968371] ata1.00: 25313904 sectors, multi 16: LBA
[ 15.976954] ata2.00: configured for UDMA/33
[ 15.977555] ata1.00: configured for UDMA/33
[ 15.978269] scsi 0:0:0:0: Direct-Access ATA Maxtor 91296D6 GAS5 PQ: 0 ANSI: 5
[ 15.985085] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8481B 1.06 PQ: 0 ANSI: 5
[ 16.546908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.689159] uhci_hcd: USB Universal Host Controller Interface driver
[ 16.690370] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 16.690389] PCI: setting IRQ 9 as level-triggered
[ 16.690412] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 16.690453] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 16.690588] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 16.690673] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001440
[ 16.690925] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.690946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.690964] usb usb1: Product: UHCI Host Controller
[ 16.690981] usb usb1: Manufacturer: Linux 2.6.32.16-std158-i386 uhci_hcd
[ 16.690999] usb usb1: SerialNumber: 0000:00:07.2
[ 16.695328] usb usb1: configuration #1 chosen from 1 choice
[ 16.695896] hub 1-0:1.0: USB hub found
[ 16.695963] hub 1-0:1.0: 2 ports detected
[ 16.891959] sd 0:0:0:0: [sda] 25313904 512-byte logical blocks: (12.9 GB/12.0 GiB)
[ 16.892564] sd 0:0:0:0: [sda] Write Protect is off
[ 16.892585] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.892811] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.893988] sda:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 16.899149] Uniform CD-ROM driver Revision: 3.20
[ 16.900613] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 16.903064] sda1
[ 16.905648] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.038990] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.039477] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 41.570996] md: linear personality registered for level -1
[ 41.587946] md: multipath personality registered for level -4
[ 41.602555] md: raid0 personality registered for level 0
[ 41.629571] md: raid1 personality registered for level 1
[ 41.644252] async_tx: api initialized (async)
[ 41.652553] xor: measuring software checksum speed
[ 41.672042] 8regs : 733.000 MB/sec
[ 41.692045] 8regs_prefetch: 655.000 MB/sec
[ 41.712041] 32regs : 380.000 MB/sec
[ 41.732045] 32regs_prefetch: 384.000 MB/sec
[ 41.752043] pII_mmx : 1011.000 MB/sec
[ 41.772040] p5_mmx : 1029.000 MB/sec
[ 41.772055] xor: using function: p5_mmx (1029.000 MB/sec)
[ 41.856278] raid6: int32x1 84 MB/s
[ 41.924141] raid6: int32x2 93 MB/s
[ 41.992406] raid6: int32x4 91 MB/s
[ 42.060140] raid6: int32x8 88 MB/s
[ 42.128096] raid6: mmxx1 232 MB/s
[ 42.196195] raid6: mmxx2 288 MB/s
[ 42.196210] raid6: using algorithm mmxx2 (288 MB/s)
[ 42.255331] md: raid6 personality registered for level 6
[ 42.255349] md: raid5 personality registered for level 5
[ 42.255363] md: raid4 personality registered for level 4
[ 42.298995] md: raid10 personality registered for level 10
[ 43.005659] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 43.023038] ISOFS: changing to secondary root
[ 43.350018] aufs test_add:256:mount[880]: uid/gid/perm /squashfs 0/0/0755, 0/0/01777
[ 43.364639] aufs test_add:256:mount[886]: uid/gid/perm /boot 0/0/0555, 0/0/01777
[ 62.520647] udev: starting version 154
[ 64.262189] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 64.601150] Marking TSC unstable due to TSC halts in idle
[ 64.607595] processor LNXCPU:00: registered as cooling_device0
[ 64.614659] Switching to clocksource acpi_pm
[ 64.645119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 64.645159] ACPI: Power Button [PWRF]
[ 64.840001] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 65.167182] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 65.315063] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x7000, revision 0
[ 66.128870] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 66.184511] parport_pc 00:0a: reported by Plug and Play ACPI
[ 66.184571] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 66.371460] ppdev: user-space parallel port driver
[ 67.020283] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 79.988998] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 79.989024] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 79.989050] Info fld=0x2092c
[ 79.989062] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 79.989104] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 79.989151] end_request: I/O error, dev sr0, sector 533680
[ 79.989171] Buffer I/O error on device sr0, logical block 133420
[ 79.989192] Buffer I/O error on device sr0, logical block 133421
[ 80.611451] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 80.611476] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 80.611500] Info fld=0x2092c
[ 80.611513] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 80.611551] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 80.611597] end_request: I/O error, dev sr0, sector 533680
[ 80.611616] Buffer I/O error on device sr0, logical block 133420
[ 80.611635] Buffer I/O error on device sr0, logical block 133421
[ 81.247530] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 81.247554] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 81.247578] Info fld=0x2092c
[ 81.247590] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 81.247627] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 81.247672] end_request: I/O error, dev sr0, sector 533680
[ 81.247691] Buffer I/O error on device sr0, logical block 133420
[ 81.247711] Buffer I/O error on device sr0, logical block 133421
[ 81.890950] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 81.890974] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 81.890997] Info fld=0x2092c
[ 81.891009] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 81.891046] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 81.891091] end_request: I/O error, dev sr0, sector 533680
[ 81.891110] Buffer I/O error on device sr0, logical block 133420
[ 81.891129] Buffer I/O error on device sr0, logical block 133421
[ 82.549549] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 82.549573] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 82.549596] Info fld=0x2092c
[ 82.549609] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 82.549645] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 82.549690] end_request: I/O error, dev sr0, sector 533680
[ 82.549708] Buffer I/O error on device sr0, logical block 133420
[ 82.549728] Buffer I/O error on device sr0, logical block 133421
[ 83.296566] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 83.296590] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 83.296613] Info fld=0x2092c
[ 83.296625] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 83.296661] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 83.296706] end_request: I/O error, dev sr0, sector 533680
[ 84.064758] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 84.064782] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 84.064805] Info fld=0x2092c
[ 84.064817] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 84.064853] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 84.064898] end_request: I/O error, dev sr0, sector 533680
[ 84.993973] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 84.993999] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 84.994025] Info fld=0x2092c
[ 84.994038] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 84.994080] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 84.994126] end_request: I/O error, dev sr0, sector 533680
[ 84.994143] __ratelimit: 4 callbacks suppressed
[ 84.994158] Buffer I/O error on device sr0, logical block 133420
[ 84.994178] Buffer I/O error on device sr0, logical block 133421
[ 85.901333] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 85.901357] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 85.901381] Info fld=0x2092c
[ 85.901393] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 85.901430] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 85.901475] end_request: I/O error, dev sr0, sector 533680
[ 85.901493] Buffer I/O error on device sr0, logical block 133420
[ 85.901513] Buffer I/O error on device sr0, logical block 133421
[ 86.878275] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 86.878299] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 86.878323] Info fld=0x2092c
[ 86.878336] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 86.878373] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 02 09 2c 00 00 02 00
[ 86.878418] end_request: I/O error, dev sr0, sector 533680
[ 86.878437] Buffer I/O error on device sr0, logical block 133420
[ 86.878457] Buffer I/O error on device sr0, logical block 133421
[ 103.724059] eth0: no IPv6 routers present
[ 110.302175] md: Autodetecting RAID arrays.
[ 110.302196] md: Scanned 0 and added 0 devices.
[ 110.302207] md: autorun ...
[ 110.302218] md: ... autorun DONE.
[ 2120.504122] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 2120.675120] usb 1-2: New USB device found, idVendor=13fe, idProduct=3e00
[ 2120.675141] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2120.675158] usb 1-2: Product: USB DISK 2.0
[ 2120.675172] usb 1-2: Manufacturer:
[ 2120.675186] usb 1-2: SerialNumber: 07BC0C029E370425
[ 2120.679093] usb 1-2: configuration #1 chosen from 1 choice
[ 2122.833050] Initializing USB Mass Storage driver...
[ 2122.833577] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2122.834456] usbcore: registered new interface driver usb-storage
[ 2122.834479] USB Mass Storage support registered.
[ 2122.843949] usb-storage: device found at 2
[ 2122.843963] usb-storage: waiting for device to settle before scanning
[ 2127.842198] usb-storage: device scan complete
[ 2127.924270] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 2127.932390] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2129.210872] sd 2:0:0:0: [sdb] 15124992 512-byte logical blocks: (7.74 GB/7.21 GiB)
[ 2129.213860] sd 2:0:0:0: [sdb] Write Protect is off
[ 2129.213881] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2129.213897] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2129.231840] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2129.231864] sdb: sdb1
[ 2129.269773] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2129.269802] sd 2:0:0:0: [sdb] Attached SCSI removable disk
