Hello,
I get a Dell W8130 SAS 5/E Perc Raid Controller. Is it possible to flash it to a pure LSI controller?
I found a lot of informtion in the web, but I'm not sure that I saw the right one.
Did anybody flash this card?
Thanks and regards
gecko
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
DELL W8130 SAS 5/E Perc Raid Controller to LSI
-
gecko1a
- Starter
- Posts: 37
- Joined: 05 Sep 2013 15:52
- Status: Offline
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: DELL W8130 SAS 5/E Perc Raid Controller to LSI
please read
http://forums.servethehome.com/raid-con ... -mode.html
no it mode and no 3tb or bigger support
http://forums.servethehome.com/raid-con ... -mode.html
no it mode and no 3tb or bigger support
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
gecko1a
- Starter
- Posts: 37
- Joined: 05 Sep 2013 15:52
- Status: Offline
Re: DELL W8130 SAS 5/E Perc Raid Controller to LSI
OK, but on the LSI I read LSISAS1068 B0
Is it the same? BTW. I need no >2TB support
I will reuse same older 1TB and 2TB HDs
gecko
Is it the same? BTW. I need no >2TB support
I will reuse same older 1TB and 2TB HDsgecko