Hard disk standby time : 5 minutes
SMART Check Interval : DISABLED
Code: Select all
camcontrol cmd ada0 -a "E5 00 00 00 00 00 00 00 00 00 00 00" -r -
50 00 00 00 00 00 00 00 00 FF 00
Code: Select all
camcontrol identify /dev/ada0
pass0: <TOSHIBA DT01ACA300 MX6OABB0> ATA-8 SATA 3.x device
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
protocol ATA/ATAPI-8 SATA 3.x
device model TOSHIBA DT01ACA300
firmware revision MX6OABB0
serial number xxxxxxx
WWN 5000039ff4c94232
cylinders 16383
heads 16
sectors/track 63
sector size logical 512, physical 4096, offset 0
LBA supported 268435455 sectors
LBA48 supported 5860533168 sectors
PIO supported PIO4
DMA supported WDMA2 UDMA6
media RPM 7200
Feature Support Enabled Value Vendor
read ahead yes yes
write cache yes yes
flush cache yes yes
overlap no
Tagged Command Queuing (TCQ) no no
Native Command Queuing (NCQ) yes 32 tags
SMART yes yes
microcode download yes yes
security yes no
power management yes yes
advanced power management yes no 0/0x00
automatic acoustic management no no
media status notification no no
power-up in Standby yes no
write-read-verify no no
unload no no
free-fall no no
data set management (TRIM) no