I am trying to install nas4free to a harddrive from the live CD. The live CD boots fine and I am able to run nas4free in this mode. However when I go through the process of trying to install nas4free I get this error:
Mount CDROM/USB g_vfs_done (:cd0[read(offset=32768, length=2048)] error =5
Error: failerd to mount device cd0
There was a problem mounting the cdrom/usb
To clarify I've tried selecting to install both embedded and full os. Thanks for any help
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Error installing nas4free from CD
-
fishbrains
- NewUser
- Posts: 2
- Joined: 18 Nov 2013 17:12
- Status: Offline
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Error installing nas4free from CD
With some brands of CD-reader this happens, try to connect to other Sata or IDE slot, and If still fails, try to install from live USB
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
fishbrains
- NewUser
- Posts: 2
- Joined: 18 Nov 2013 17:12
- Status: Offline
Re: Error installing nas4free from CD
Thanks for your help. In the end I tried a spare CD drive and that solved the problem.