This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Help interpret degraded state

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
cruzmiester
NewUser
NewUser
Posts: 13
Joined: 07 Nov 2012 16:21
Status: Offline

Help interpret degraded state

Post by cruzmiester »

I have 2 z pools:
zpool "disk1" shows it's degraded, in the info tab one disk is missing but then so is one disk missing in the zpool "pool_2" with health status "online"

I would appreciate some input into what is happening

I've a screen shot of the information tab.

disk1:
it should have the following devices
mfid0
mfid1
mfid2
mfid3
mfid4
mfid5
mfid6
mfid7

pool_2
mfid8
mfid9
mfid10

Thx for the help!!

mfid(4) = http://www.unix.com/man-page/freebsd/4/MFI/
You do not have the required permissions to view the files attached to this post.

kenZ71
Advanced User
Advanced User
Posts: 379
Joined: 27 Jun 2012 20:18
Location: Northeast, USA
Status: Offline

Re: Help interpret degraded state

Post by kenZ71 »

My interpretation is the pool named disk 1 is degraded due a failed drive mfid10.

Do you have a spare you can borrow to get the pool healthy ?
11.2-RELEASE-p3 | ZFS Mirror - 2 x 8TB WD Red | 28GB ECC Ram
HP ML10v2 x64-embedded on Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz

Extra memory so I can host a couple VMs
1) Unifi Controller on Ubuntu
2) Librenms on Ubuntu

cruzmiester
NewUser
NewUser
Posts: 13
Joined: 07 Nov 2012 16:21
Status: Offline

Re: Help interpret degraded state

Post by cruzmiester »

Hi thanks for the input, the problem is mfid10 was never in this pool

Post Reply

Return to “Hard disk & controller”