Bonjour,
Ouf, tout est rentré dans l'ordre. J'ai retrouvé mes disques.
Il y a eut tout une série de dysfonctionnements + un peu d'affolement de ma part et du coup,
même si je retrouve mes disques avec toutes mes données (merci zfs !), je ne sais pas trop quoi en penser,
sauf qu'il est toujours aussi difficile de bien comprendre les informations fournies par smart !
D'ailleurs voici ci-dessous un contrôle total de mes 4 disques.
Si qqun pouvait y jeter un coup d’œil et me dire ce qu'il en pense, ce serait vraiment sympa !
A l'évidence aussi, j'ai un soucis sur la qualité des mes fixations de câbles sata !
Car c'est bien en ouvrant mon PC pour y ajouter de la RAM que les problèmes ont commencé ...
Et franchement, les fixations des câbles sata un peu raides (les câbles) sur la cartes mère, c'est pas très stable et pas très fiable.
Ceci dit, je me suis aperçu d'un truc (peut-être ce serait mieux d'en faire un post à part ????) :
Je fais habituellement toujours une mise à jour de la version de mon Nas via l'option du menu
"Système/Logiciel/Activer le chargement de mise à jour" puisque je suis avec le système de mon Nas sur clé USB en embedded NAS4Free 9.1.0.1 (847).
Avec les différents problèmes survenus ces derniers jour, j'ai été amené à réinstaller totalement la version embedded NAS4Free 9.1.0.1 (847), donc la même version.
Et je me suis aperçu que certaines choses avaient changé, entre autres l'affichage de certains paramètres dans la configuration du loader.conf :
Code: Select all
vfs.zfs.arc_max=768M
vfs.zfs.arc_min=256M
vfs.zfs.vdev.cache.max=65536
vm.kmem_size=3584M
vm.kmem_size_max=4096M
chose que je n'avais pas avec la même version, mais upgradée via les mises à jour par le webgui. Bizarre, non ?
Alors, je me demande si pour une version donnée, un Nas4Free installé de zéro ou un Nas4Free obtenu par mises à jour successives donnent bien
exactement la même chose ?
Qu'en pensez-vous ?
Merci à sleid pour ses réponses et à tout ceux qui m'ont lu.
Cordialement.
Voici les traces de smart :
Code: Select all
==================================================================================================
ada0
==================================================================================================
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF)
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA0094164
LU WWN Device Id: 5 0014ee 6558a8334
Firmware Version: 50.0AB50
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 25 22:31:13 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (36600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 417) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 170 166 021 - 6491
4 Start_Stop_Count -O--CK 099 099 000 - 1414
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 069 069 000 - 22642
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 474
192 Power-Off_Retract_Count -O--CK 200 200 000 - 399
193 Load_Cycle_Count -O--CK 001 001 000 - 1062868
194 Temperature_Celsius -O---K 124 096 000 - 26
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 1
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 3
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 10
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 10 [9] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:25.000 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:24.999 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:22.003 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:22.002 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:19.090 READ FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:22.003 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:22.002 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:19.090 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:19.089 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:16.153 READ FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:19.090 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:19.089 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:16.153 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:16.152 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:13.239 READ FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:16.153 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:16.152 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:13.239 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:13.239 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:10.326 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:13.239 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:13.239 READ LOG EXT
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:10.326 READ FPDMA QUEUED
60 00 10 00 08 00 00 80 73 93 f8 40 08 00:01:10.326 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:10.326 READ LOG EXT
Error 5 [4] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 10 00 00 80 73 93 f8 40 08 00:01:10.326 READ FPDMA QUEUED
60 00 10 00 08 00 00 80 73 93 f8 40 08 00:01:10.326 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:10.326 READ LOG EXT
60 00 10 00 08 00 00 80 73 93 f8 40 08 00:01:07.413 READ FPDMA QUEUED
60 00 10 00 00 00 00 80 73 93 f8 40 08 00:01:07.413 READ FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 08 00 00 80 73 93 f8 40 08 00:01:07.413 READ FPDMA QUEUED
60 00 10 00 00 00 00 80 73 93 f8 40 08 00:01:07.413 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:07.413 READ LOG EXT
60 00 10 00 00 00 00 80 73 93 f8 40 08 00:01:04.380 READ FPDMA QUEUED
60 00 10 00 f8 00 00 80 73 93 f8 40 08 00:01:04.380 READ FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 12645 hours (526 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 80 73 93 f8 40 00 Error: UNC at LBA = 0x807393f8 = 2155058168
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 00 00 00 80 73 93 f8 40 08 00:01:04.380 READ FPDMA QUEUED
60 00 10 00 f8 00 00 80 73 93 f8 40 08 00:01:04.380 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:01:04.380 READ LOG EXT
60 00 10 00 f8 00 00 80 73 93 f8 40 08 00:01:01.371 READ FPDMA QUEUED
60 00 10 00 f0 00 00 80 73 93 f8 40 08 00:01:01.371 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 90% 5303 -
# 2 Extended offline Completed without error 00% 5302 -
# 3 Extended offline Completed without error 00% 5295 -
# 4 Extended offline Completed without error 00% 5288 -
# 5 Extended offline Completed without error 00% 5281 -
# 6 Extended offline Completed without error 00% 5274 -
# 7 Extended offline Completed without error 00% 5267 -
# 8 Extended offline Completed without error 00% 5260 -
# 9 Extended offline Completed without error 00% 5253 -
#10 Extended offline Completed without error 00% 5246 -
#11 Extended offline Completed without error 00% 5239 -
#12 Extended offline Completed without error 00% 5232 -
#13 Extended offline Interrupted (host reset) 90% 5225 -
#14 Extended offline Completed without error 00% 5224 -
#15 Extended offline Completed without error 00% 5217 -
#16 Extended offline Completed without error 00% 5210 -
#17 Extended offline Completed without error 00% 5203 -
#18 Extended offline Completed without error 00% 5196 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 26 Celsius
Power Cycle Min/Max Temperature: 17/26 Celsius
Lifetime Min/Max Temperature: 17/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (44)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 1754 Vendor specific
==================================================================================================
ada1
==================================================================================================
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF)
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA0087406
LU WWN Device Id: 5 0014ee 6aadfd8e0
Firmware Version: 50.0AB50
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 25 22:31:23 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (36000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 410) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 163 159 021 - 6841
4 Start_Stop_Count -O--CK 099 099 000 - 1409
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 069 069 000 - 22645
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 465
192 Power-Off_Retract_Count -O--CK 200 200 000 - 378
193 Load_Cycle_Count -O--CK 001 001 000 - 1083127
194 Temperature_Celsius -O---K 122 096 000 - 28
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 1
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 20% 5304 -
# 2 Extended offline Completed without error 00% 5298 -
# 3 Extended offline Completed without error 00% 5291 -
# 4 Extended offline Completed without error 00% 5284 -
# 5 Extended offline Completed without error 00% 5277 -
# 6 Extended offline Completed without error 00% 5270 -
# 7 Extended offline Completed without error 00% 5263 -
# 8 Extended offline Completed without error 00% 5256 -
# 9 Extended offline Completed without error 00% 5249 -
#10 Extended offline Completed without error 00% 5242 -
#11 Extended offline Completed without error 00% 5235 -
#12 Extended offline Completed without error 00% 5228 -
#13 Extended offline Completed without error 00% 5221 -
#14 Extended offline Completed without error 00% 5214 -
#15 Extended offline Completed without error 00% 5207 -
#16 Extended offline Completed without error 00% 5200 -
#17 Extended offline Completed without error 00% 5193 -
#18 Extended offline Completed without error 00% 5186 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 17/28 Celsius
Lifetime Min/Max Temperature: 17/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (83)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 1764 Vendor specific
==================================================================================================
ada2
==================================================================================================
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF)
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA0073912
LU WWN Device Id: 5 0014ee 600359f5e
Firmware Version: 50.0AB50
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 25 22:31:28 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (37200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 424) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 165 163 021 - 6708
4 Start_Stop_Count -O--CK 099 099 000 - 1315
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 069 069 000 - 22691
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 385
192 Power-Off_Retract_Count -O--CK 200 200 000 - 316
193 Load_Cycle_Count -O--CK 001 001 000 - 1096845
194 Temperature_Celsius -O---K 123 100 000 - 27
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 5
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [4] occurred at disk power-on lifetime: 22690 hours (945 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 ce 01 44 b8 40 00 Error: UNC at LBA = 0xce0144b8 = 3456189624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 a0 00 00 ce 01 44 78 40 08 00:08:22.327 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:08:22.324 READ LOG EXT
61 00 08 00 a0 00 00 d4 00 d1 c0 40 08 00:08:19.127 WRITE FPDMA QUEUED
61 00 20 00 98 00 00 d4 00 96 28 40 08 00:08:19.127 WRITE FPDMA QUEUED
61 00 08 00 90 00 00 d4 00 d1 b8 40 08 00:08:19.126 WRITE FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 22690 hours (945 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 ce 01 44 b8 40 00 Error: WP at LBA = 0xce0144b8 = 3456189624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 a0 00 00 d4 00 d1 c0 40 08 00:08:19.127 WRITE FPDMA QUEUED
61 00 20 00 98 00 00 d4 00 96 28 40 08 00:08:19.127 WRITE FPDMA QUEUED
61 00 08 00 90 00 00 d4 00 d1 b8 40 08 00:08:19.126 WRITE FPDMA QUEUED
60 01 00 00 88 00 00 ce 01 44 78 40 08 00:08:19.126 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 00:08:19.123 READ LOG EXT
Error 3 [2] occurred at disk power-on lifetime: 22690 hours (945 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 ce 01 44 b8 40 00 Error: WP at LBA = 0xce0144b8 = 3456189624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 78 00 00 d4 00 d1 98 40 08 00:08:15.964 WRITE FPDMA QUEUED
61 00 18 00 70 00 00 d4 00 d1 70 40 08 00:08:15.964 WRITE FPDMA QUEUED
61 00 10 00 68 00 00 d4 00 d1 48 40 08 00:08:15.964 WRITE FPDMA QUEUED
61 00 28 00 60 00 00 d4 00 d1 18 40 08 00:08:15.964 WRITE FPDMA QUEUED
61 00 08 00 58 00 00 86 00 32 d0 40 08 00:08:15.964 WRITE FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 22690 hours (945 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 ce 01 44 b8 40 00 Error: WP at LBA = 0xce0144b8 = 3456189624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 58 00 18 00 00 d4 00 d1 48 40 08 00:08:12.776 WRITE FPDMA QUEUED
61 00 18 00 10 00 00 d4 00 d1 18 40 08 00:08:12.776 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 86 00 32 d0 40 08 00:08:12.776 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 d4 00 d1 40 40 08 00:08:12.775 WRITE FPDMA QUEUED
61 00 08 00 00 00 00 d4 00 d1 38 40 08 00:08:12.775 WRITE FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 22690 hours (945 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 ce 01 44 b8 40 00 Error: UNC at LBA = 0xce0144b8 = 3456189624
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 90 00 00 ce 01 44 78 40 08 00:08:09.633 READ FPDMA QUEUED
60 01 00 00 90 00 00 ce 01 23 38 40 08 00:08:09.620 READ FPDMA QUEUED
60 01 00 00 90 00 00 ce 01 22 38 40 08 00:08:09.614 READ FPDMA QUEUED
60 01 00 00 90 00 00 ce 01 0f 78 40 08 00:08:09.544 READ FPDMA QUEUED
60 01 00 00 90 00 00 ce 01 0e 78 40 08 00:08:09.529 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 30% 5316 -
# 2 Extended offline Completed without error 00% 5311 -
# 3 Extended offline Completed without error 00% 5304 -
# 4 Extended offline Completed without error 00% 5297 -
# 5 Extended offline Completed without error 00% 5291 -
# 6 Extended offline Completed without error 00% 5284 -
# 7 Extended offline Completed without error 00% 5277 -
# 8 Extended offline Completed without error 00% 5270 -
# 9 Extended offline Completed without error 00% 5263 -
#10 Extended offline Completed without error 00% 5256 -
#11 Extended offline Completed without error 00% 5249 -
#12 Extended offline Completed without error 00% 5242 -
#13 Extended offline Completed without error 00% 5235 -
#14 Extended offline Completed without error 00% 5228 -
#15 Extended offline Completed without error 00% 5220 -
#16 Extended offline Completed without error 00% 5213 -
#17 Extended offline Completed without error 00% 5206 -
#18 Extended offline Completed without error 00% 5199 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 17/27 Celsius
Lifetime Min/Max Temperature: 17/51 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (376)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 1769 Vendor specific
==================================================================================================
ada3
==================================================================================================
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green (AF)
Device Model: WDC WD20EARS-00MVWB0
Serial Number: WD-WMAZA0027642
LU WWN Device Id: 5 0014ee 60035b2b0
Firmware Version: 50.0AB50
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 25 22:31:33 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (35400) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 403) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1
3 Spin_Up_Time POS--K 164 159 021 - 6775
4 Start_Stop_Count -O--CK 099 099 000 - 1331
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 071 071 000 - 21498
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 403
192 Power-Off_Retract_Count -O--CK 200 200 000 - 333
193 Load_Cycle_Count -O--CK 001 001 000 - 1086779
194 Temperature_Celsius -O---K 123 103 000 - 27
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 1
198 Offline_Uncorrectable ----CK 200 200 000 - 2
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 90% 5316 -
# 2 Extended offline Completed without error 00% 5315 -
# 3 Extended offline Completed without error 00% 5308 -
# 4 Extended offline Completed without error 00% 5301 -
# 5 Extended offline Completed without error 00% 5294 -
# 6 Extended offline Completed without error 00% 5287 -
# 7 Extended offline Completed without error 00% 5281 -
# 8 Extended offline Completed without error 00% 5273 -
# 9 Extended offline Completed without error 00% 5266 -
#10 Extended offline Completed without error 00% 5259 -
#11 Extended offline Completed without error 00% 5252 -
#12 Extended offline Completed without error 00% 5245 -
#13 Extended offline Completed without error 00% 5238 -
#14 Extended offline Completed without error 00% 5231 -
#15 Extended offline Completed without error 00% 5224 -
#16 Extended offline Completed without error 00% 5218 -
#17 Extended offline Completed without error 00% 5210 -
#18 Extended offline Completed without error 00% 5203 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 17/27 Celsius
Lifetime Min/Max Temperature: 16/47 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (406)
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 1774 Vendor specific
