At the moment I successfully run an embeded NAS4FREE setup with a ZFS pool, several Datasets and Samba shares pointing at them.
A also have a rather large ebook collection which I manage with Calibre. I wanted to work with this program the same way I work with Lightroom and its DB and photos: locally stored SQLite-DB, and the books stored on network share. There are some hints to get this to work, but with one of them I don't know how to do it.
This one hint says that the concerning samba share should be mounted with the nobrl option. I know what this option does, but I dont' know exactly where to set up in an embedded NAS4Free instance.
Does anyone know how to do that?
Tanks in advance.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Option nobrl
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Option nobrl
only need to add in auxiliary parameter ( last option in SMB WebGUI) http://wiki.nas4free.org/doku.php?id=do ... _smb_samba
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510