This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Promise SuperTrak EX4350 RAID Controller

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
apalgen
NewUser
NewUser
Posts: 2
Joined: 29 Oct 2012 18:47
Status: Offline

Promise SuperTrak EX4350 RAID Controller

Post by apalgen »

I am trying to get my older Promise SuperTrak EX4350 RAID Controller to work with NAS4Free
Can anyone help? It seems there are no drivers for newer FreeBSD versions than 6, can I use the old ones?

http://firstweb.promise.com/product/pro ... uct_id=171
http://firstweb.promise.com/upload/Supp ... r_v1.0.pdf
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Promise SuperTrak EX4350 RAID Controller

Post by raulfg3 »

No need to use old ones, Drivers are included on new releases until new driver appear.

It's not clear but if use IPO333 Intel Chipset https://www.suse.com/yes/85972.htm, is the same as ARECA cards use : http://lists.freebsd.org/pipermail/free ... 27140.html

so the driver for BSD is: http://www.freebsd.org/releases/9.1R/hardware.html
http://www.freebsd.org/cgi/man.cgi?quer ... .1-RELEASE

But until you test it, is only a suposition.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
Post Reply

Return to “Hard disk & controller”