???????
I have yet to find some free time to upgrade...
I hope I will test a new installation in the next few days and post my results, too...
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
WOL and HP microservers [SOLVED, but]
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
Re: WOL and HP microservers [SOLVED, but]
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
-
arinci
- Starter
- Posts: 17
- Joined: 01 May 2014 08:18
- Status: Offline
Re: WOL and HP microservers [SOLVED, but]
It's quite strange, I have updated my HP Microserver and the Broadcom onboard lan works fine.tses wrote:I made the mistake updating to the latest version ...
The 9.3.0.2.1349 seems that does not detect the onboard LAN adapter at all.
I would appreciate any help or idea.
Yiannis
I'm using WOL functionality almost daily and I'm experiencing no problem at all!
-
tses
- NewUser
- Posts: 5
- Joined: 07 Feb 2014 13:29
- Status: Offline
Re: WOL and HP microservers [SOLVED, but]
Hi arinci,
I reinstalled 1349 and works fine including the WOL.
Probably something went wrong during the upgrade.
Thanks for your help !
I reinstalled 1349 and works fine including the WOL.
Probably something went wrong during the upgrade.
Thanks for your help !
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
Re: WOL and HP microservers [SOLVED, but]
OK, then, no worries...
A question, though.... Does WOL work on gigabit network, only, or on 10/100, too? (If it is easy to check)
A question, though.... Does WOL work on gigabit network, only, or on 10/100, too? (If it is easy to check)
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)