This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Card Motorola Wildcard X100P

Green PC, UPS, Power saving, etc.
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
Paladius
NewUser
NewUser
Posts: 6
Joined: 19 Sep 2013 13:55
Status: Offline

Card Motorola Wildcard X100P

Post by Paladius »

Hi,

can help me install X100P?

03:05.0 Communication controller: Motorola Wildcard X100P
Subsystem: Efar Microsystems Device 0001
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at c000
Memory at fe900000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2

regards.
CentOS 6.6 x64 - Scandisk Ssd 32gb Sata III 6gb/s, 8 GB RAM, CPU Amd X8 FX-9590 4.7ghz, Cosair HX750
4x ST3000DM001 3TB SATA III 6gb/s on Raid10=6TB On a Asus Crosshair V Formula Z
Packages enable: Serviio - Trasmission - SMB - SSH - UPS - Apache2+PHP5 - Owncloud - TFTP - Asterisk 1.6 + TDM410P - Twin2Cs
Swith: Dlink DGS-1024D - 24ports 1Gbps
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Card Motorola Wildcard X100P

Post by raulfg3 »

more info: http://www.digium.com/sites/digium/file ... asheet.pdf
but I do not understand why you need convert a NAS into a PBX, perhaps 2 dedicated PC be more easy/logic? (one for NAS other with linux for PBX)
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
Paladius
NewUser
NewUser
Posts: 6
Joined: 19 Sep 2013 13:55
Status: Offline

Re: Card Motorola Wildcard X100P

Post by Paladius »

raulfg3 wrote:more info: http://www.digium.com/sites/digium/file ... asheet.pdf
but I do not understand why you need convert a NAS into a PBX, perhaps 2 dedicated PC be more easy/logic? (one for NAS other with linux for PBX)
Thx, for information.

no have hardware additional to install PBX, i make everything in my Nas4Free Hardware.
CentOS 6.6 x64 - Scandisk Ssd 32gb Sata III 6gb/s, 8 GB RAM, CPU Amd X8 FX-9590 4.7ghz, Cosair HX750
4x ST3000DM001 3TB SATA III 6gb/s on Raid10=6TB On a Asus Crosshair V Formula Z
Packages enable: Serviio - Trasmission - SMB - SSH - UPS - Apache2+PHP5 - Owncloud - TFTP - Asterisk 1.6 + TDM410P - Twin2Cs
Swith: Dlink DGS-1024D - 24ports 1Gbps
Top
User avatar
Paladius
NewUser
NewUser
Posts: 6
Joined: 19 Sep 2013 13:55
Status: Offline

Re: Card Motorola Wildcard X100P

Post by Paladius »

Hi,

Sucess.

install dadhi wih: pkg_add -r dadhi .
install dahdi-kmod with: pkg_add -rv http://ftpmirror.your.org/pub/FreeBSD-U ... 0rc5_6.tbz

edit /etc/rc.conf add lines:

dahdi_enable="YES"
dahdi_modules="wcfxo"

Save and reboot the system.

regards.
CentOS 6.6 x64 - Scandisk Ssd 32gb Sata III 6gb/s, 8 GB RAM, CPU Amd X8 FX-9590 4.7ghz, Cosair HX750
4x ST3000DM001 3TB SATA III 6gb/s on Raid10=6TB On a Asus Crosshair V Formula Z
Packages enable: Serviio - Trasmission - SMB - SSH - UPS - Apache2+PHP5 - Owncloud - TFTP - Asterisk 1.6 + TDM410P - Twin2Cs
Swith: Dlink DGS-1024D - 24ports 1Gbps
Top
Post Reply

Return to “Other hardware”