Hi,
I remember I use to have the option for 'Create mask' and 'Directory mask' under Services > CIFS/SMB > Advanced settings. Now seem to be taken out with version 9.1 and 9.2. Where can I set these masks for SMB?
Thanks!
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Question on create/directory mask in CIFS/SMB
-
Brent502
- NewUser
- Posts: 13
- Joined: 30 Oct 2012 21:50
- Status: Offline
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Question on create/directory mask in CIFS/SMB
there are no option in new versions: http://wiki.nas4free.org/doku.php?id=do ... _smb_samba
but you can force on Auxiliary parameters : Create mask = 0666 or other values you need.
PD: Default values works well for a majority of users.
but you can force on Auxiliary parameters : Create mask = 0666 or other values you need.
PD: Default values works well for a majority of users.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510