Good afternoon.
Can I set up NAS4Free on an old PC hard drive then move that drive to an HP Mediasmart Server EX475? If so, is there anything special that I would need to do to get this configured and up and running?
Thanks.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Setting up for use in HP Mediasmart EX475
-
wyzard
- NewUser
- Posts: 1
- Joined: 14 Feb 2014 20:16
- Status: Offline
-
armandh
- Advanced User
- Posts: 398
- Joined: 23 Jun 2012 04:15
- Location: St Louis County Missouri USA
- Status: Offline
Re: Setting up for use in HP Mediasmart EX475
after doing that with the embedded OS the first tricky part is the NIC and IP settings
it can be done blind [do it on a box with video and duplicate the steps blind]
or I believe it can also be done via SSH but I have not done so.
it can be done blind [do it on a box with video and duplicate the steps blind]
or I believe it can also be done via SSH but I have not done so.
4 thread 3300 Mhz Intel i3, 1 TB ZFS mirror, available RAM 7.823 Gb, 64 bit NAS4Free 9.1.0.1 rev 573 [88 watts, 48 Mbps]
2 thread 1600 Mhz atom/ion, 1 TB ZFS mirror, available RAM 3.083 Gb, 64 bit NAS4Free-9.1.0.1 rev 573 [27 watts, 35 Mbps]
2 thread 3900 Mhz AMD A6-6400K, 2 TB ZFS Mirror, available RAM 7.557 Gb, 64 bit Nas4Free 9.3.0.2.1771 [89 watts, 68 Mbps]
2 thread 1600 Mhz atom/ion, 1 TB ZFS mirror, available RAM 3.083 Gb, 64 bit NAS4Free-9.1.0.1 rev 573 [27 watts, 35 Mbps]
2 thread 3900 Mhz AMD A6-6400K, 2 TB ZFS Mirror, available RAM 7.557 Gb, 64 bit Nas4Free 9.3.0.2.1771 [89 watts, 68 Mbps]
-
TommySharp
- NewUser
- Posts: 3
- Joined: 07 Feb 2013 23:36
- Status: Offline
Re: Setting up for use in HP Mediasmart EX475
Would be great if the LED lights in the mediasmart server could also be used 
-
crowi
- Forum Moderator
- Posts: 1176
- Joined: 21 Feb 2013 16:18
- Location: Munich, Germany
- Status: Offline
Re: Setting up for use in HP Mediasmart EX475
You can buy VGA cable which connects to the debug header, this makes things easier.
http://www.mediasmartserver.net/forums/ ... f=6&t=3980
http://www.mediasmartserver.net/forums/ ... f=6&t=3980
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
-
zoon01
- Developer
- Posts: 724
- Joined: 20 Jun 2012 21:06
- Location: Netherlands
- Contact:
- Status: Offline
Re: Setting up for use in HP Mediasmart EX475
How did this install ends for, is it working now, i think it's an nice box that HP Mediasmart EX475.
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz
Development system is same system in virtualbox.
Development system is same system in virtualbox.