This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Innaccessible iSCSI targets

iSCSI over TCP/IP.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
spammeatwill
Starter
Starter
Posts: 23
Joined: 08 May 2013 11:24
Status: Offline

Innaccessible iSCSI targets

Post by spammeatwill »

Hello,

Every now and then, my N4F stops serving iSCSI properly and in the logs I can only see this errors:

Code: Select all

Mar  9 16:21:18 n4f istgt[12491]: istgt_iscsi.c:4977:istgt_iscsi_send_nopin: ***ERROR*** before Full Feature
Mar  9 16:21:18 n4f istgt[12491]: istgt_iscsi.c:5622:worker: ***ERROR*** iscsi_send_nopin() failed
Mar  9 16:21:24 n4f istgt[12491]: istgt_iscsi.c:4977:istgt_iscsi_send_nopin: ***ERROR*** before Full Feature
Mar  9 16:21:24 n4f istgt[12491]: istgt_iscsi.c:5622:worker: ***ERROR*** iscsi_send_nopin() failed
Mar  9 16:21:29 n4f istgt[12491]: ABORT_TASK
Mar  9 16:21:34 n4f istgt[12491]: istgt_iscsi.c:4977:istgt_iscsi_send_nopin: ***ERROR*** before Full Feature
Mar  9 16:21:34 n4f istgt[12491]: istgt_iscsi.c:5622:worker: ***ERROR*** iscsi_send_nopin() failed
Mar  9 16:21:48 n4f istgt[12491]: istgt_iscsi.c:4977:istgt_iscsi_send_nopin: ***ERROR*** before Full Feature
Mar  9 16:21:48 n4f istgt[12491]: istgt_iscsi.c:5622:worker: ***ERROR*** iscsi_send_nopin() failed
Mar  9 16:22:17 n4f istgt[12491]: istgt_iscsi.c:4977:istgt_iscsi_send_nopin: ***ERROR*** before Full Feature
Mar  9 16:22:17 n4f istgt[12491]: istgt_iscsi.c:5622:worker: ***ERROR*** iscsi_send_nopin() failed
Normally a "save&restart" followed by a rescan on my ESXi servers brings the datastores back to life, but not today.

I will try a reboot shortly and post back if that solves the issue.
9.2.0.1 - Shigawire (revision 925)
x64-embedded on Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz

spammeatwill
Starter
Starter
Posts: 23
Joined: 08 May 2013 11:24
Status: Offline

Re: Innaccessible iSCSI targets

Post by spammeatwill »

Hello,

I confirm that after a reboot, iSCSI is working again and accessible from all servers.
This is too disruptive for a 24/7 storage with VMs running on datastores bound to iSCSI targets.
Does anyone have this issue or know how this can be debugged/solved?

Thanks.
9.2.0.1 - Shigawire (revision 925)
x64-embedded on Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz

Post Reply

Return to “iSCSI (Internet Small Computer Systems Interface)”