Port Naming Convention for UPS

[sjbs]

I'm new to the UPS scene in BSD and would like to get this going properly.

I have an inexpensive UPS, it is a no-name "Sahara Electra 600 Plus" and with a serial port. It is connected to a HP Microserver via a Serial-to-USB converter.

When plugging the cable in the Microserver, I get the following being displayed on the screen:

ugen0.3: <FTDI> at usbus0
uftdi0: <USB - Serial Cable> on usbus0

The plan would be to try all the drivers, one by one to attempt to get this working. But to make it feasible, I need the correct port naming.

What do I enter as the port description on the GUI:

usbus0

/dev/usbus0

uftdi0

/dev/uftdi0

or
/dev/ugen0.3

or anything else?

[LA70]

I'm running my UPS on serial port1, and thats /dev/cuau0 - so I'd try /dev/cuau0 and up.
/L

[raulfg3]

http://www.networkupstools.org/

http://www.networkupstools.org/stable-hcl.html