It would be nice to have LM Sensors report CPU temp, fan speed and all the other things it can display with gkrellm.
My Nas4Free box will soon be water cooled so this is necessary for my setup. It this function available in Nas4Free?
Thanks
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
LM Sensors in Nas4Free
Moderator: crest
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: LM Sensors in Nas4Free
As far as I know lmsensor is for Linux system and Nas4Free is based on BSD 9.
there are other alternatives: http://forums.freebsd.org/showthread.php?t=4822
there are other alternatives: http://forums.freebsd.org/showthread.php?t=4822
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
rlbewick
- NewUser
- Posts: 4
- Joined: 16 Jul 2012 20:30
- Status: Offline
Re: LM Sensors in Nas4Free
I have discovered something that should work with FreeBSD 9.x but requires "kldload coretemp".raulfg3 wrote:As far as I know lmsensor is for Linux system and Nas4Free is based on BSD 9.
there are other alternatives: http://forums.freebsd.org/showthread.php?t=4822
I tried to running this command but coretemp was not found. Is there a way I can add this to my config
from live CD using a USB drive for system config.
http://www.minihowto.eu/freebsd-9-0-cpu ... ep-by-step
mbmon may also work but it is also not part of Nas4Free...
Thanks!