Hi all,
I have upgraded to the lasted version (From 9.1) and everything seems to be working correctly including my Jail i have set up (Thanks to raulfg3 for all the help)
After checking everything it seems that Disk Management has an issue (Pic attached) with the disks?
My ZFS pool is working (Did not upgraded the ZFS pool to v5000 yet)
To upgrade i saved the config, installed to a new usb key and re-loaded my config. (embedded version)
My question is, do i just do 'Clear config and import disks'? Will this break my ZFS pool? I don't want to lose any data.
Also, should i upgrade the ZFS version? Do i need to?
Thanks.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
9.2.0.1 - Shigawire (revision 972) Disks Management Error
-
nfenech
- Starter
- Posts: 18
- Joined: 25 Jun 2012 01:28
- Status: Offline
9.2.0.1 - Shigawire (revision 972) Disks Management Error
You do not have the required permissions to view the files attached to this post.
Last edited by nfenech on 09 Jun 2014 03:58, edited 1 time in total.
-
nfenech
- Starter
- Posts: 18
- Joined: 25 Jun 2012 01:28
- Status: Offline
Re: 9.2.0.1 - Shigawire (revision 972) Disks Management Erro
Should have mentioned that i am using a HP N40L with modded bios (For the 5th HDD)
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: 9.2.0.1 - Shigawire (revision 972) Disks Management Erro
just press 'Clear config and import disks'
it will not break your zfs pool
it will reset the apm/smart/power managment settings for your discs
it will not break your zfs pool
it will reset the apm/smart/power managment settings for your discs
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
nfenech
- Starter
- Posts: 18
- Joined: 25 Jun 2012 01:28
- Status: Offline
Re: 9.2.0.1 - Shigawire (revision 972) Disks Management Erro
Done.
All working.
What about upgrading the ZFS version? Any advantage?
Thanks.
All working.
What about upgrading the ZFS version? Any advantage?
Thanks.
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: 9.2.0.1 - Shigawire (revision 972) Disks Management Erro
i would stay on 28 for now.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
apollo567
- Site Admin
- Posts: 675
- Joined: 23 Jun 2012 06:37
- Location: Ludwigshafen, Germany
- Status: Offline
Re: 9.2.0.1 - Shigawire (revision 972) Disks Management Erro
I agree on thisb0ssman wrote:i would stay on 28 for now.
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04
-
Linda13
- NewUser
- Posts: 1
- Joined: 29 Dec 2014 07:33
- Status: Offline
Re: 9.2.0.1 - Shigawire (revision 972) Disks Management Erro
i agree toob0ssman wrote:i would stay on 28 for now.
-------------------------------
coque iPad air 2
housse samsung galaxy s5