As i have 2 intel PCIe cards set up as LACP i use re0 as OPT3
I have set up routes for LAN and OPT3 but get always error when i try to download tarballs for the brig (LAN lagg0)
There is no problem to change it and set up lagg0 as OPT2/OPT3
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
re0 always LAN?
-
lindsay
- Forum Moderator
- Posts: 282
- Joined: 23 Jun 2012 09:59
- Location: Steinkjer,Norway
- Status: Offline
re0 always LAN?
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T
XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T
XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror