Hi,
Am I correct to assume that binding 2 Gigabit connections trough LACP on the server can provide 1 Gb/s speeds to two different clients connected to the server simultaneously?
Cheers,
Karel.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
LACP to provide 2 different clients with 1Gb/s connections?
-
helloha
- Starter
- Posts: 18
- Joined: 23 Jan 2014 14:49
- Status: Offline
LACP to provide 2 different clients with 1Gb/s connections?
Supermicro X7DWN+ - Dual Xeon 5130 - 56GB Ram - 8x 4TB Seagate ST4000DM000 - 2x 4TB HGST HDN724040ALE640 - 1x 256GB Crucial_CT256MX100SSD1 - TDK LoR TF30 USB 3.0 PMAP (boot) - Dell H310 SAS/SATA Controller - 2x HP360T Gb NIC - Supermicro SC825 2U Chassis 920Watt Platinum PSU.
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: LACP to provide 2 different clients with 1Gb/s connectio
correct more or less ( never can share max. expected banwith), and only for 2 differents clients at same time, never can double banwith for same PC
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510