This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Replacing defective disk

Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
keefe
NewUser
NewUser
Posts: 1
Joined: 14 Feb 2013 11:21
Status: Offline

Replacing defective disk

Post by keefe »

Hi,

One of my disk (connected through a SAS controller) failed recently in a RAIDZ setup causing the computer to stuck in a read error loop before the OS started to boot.

I had to remove the defective disk in order for NAS4Free to start up and when it does the zpool I created is no longer available.

I there any way for me to bring the zpool online so i can replace it with a new disk?

When I plug the disk back in after NAS4Free has booted, I'm seeing these errors.

Code: Select all

SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
Error 5, Unretryable error
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Replacing defective disk

Post by b0ssman »

what is the output of zpool status ?
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
Post Reply

Return to “ZFS (only!)”