He perdido mi raid-5
Alguien me puede ayudar a intentar recuperar la informacion o almenos a que no vuelva a ocurrir.Hace unos dias monte un Raid-5 con Nas4Free 9.1.0.1 - Sandstorm (revision 573) (El nas4free hace ya tiempo que estava funcionando pero sin raid)
Todo funcionava correctamente pero hoy me encuentro que no me deja acceder a los recursos compartidos.
Entro a la configuracion de los discos y me pone que los numeros de serie han cambiado.
El Raid esta en degraded.
Dentro de la configuracion me pone:
The following input errors were detected:
You must add disks first.
Pero no me sale ningun disco.
el dmesg manda:
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <nVidia> at usbus2
uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <nVidia> at usbus3
uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
(aprobe1:ahcich0:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 46 00
(aprobe1:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe1:ahcich0:0:0:0): ATA status: 61 (DRDY DF ERR), error: 04 (ABRT )
(aprobe1:ahcich0:0:0:0): RES: 61 04 00 00 00 40 00 00 00 46 00
(aprobe1:ahcich0:0:0:0): Retrying command
uhub0: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.2: <Logitech> at usbus0
ukbd0: <USB Keyboard> on usbus0
kbd2 at ukbd0
uhid0: <USB Keyboard> on usbus0
ahcich0: Timeout on slot 0 port 0
ahcich0: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 461 serr 00000000 cmd 00000017
(aprobe1:ahcich0:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 46 00
(aprobe1:ahcich0:0:0:0): CAM status: Command timeout
(aprobe1:ahcich0:0:0:0): Error 5, Retries exhausted
(aprobe1:ahcich0:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 46 00
(aprobe1:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe1:ahcich0:0:0:0): ATA status: 61 (DRDY DF ERR), error: 04 (ABRT )
(aprobe1:ahcich0:0:0:0): RES: 61 04 00 00 00 40 00 00 00 46 00
(aprobe1:ahcich0:0:0:0): Retrying command
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
ahcich0: Timeout on slot 0 port 0
ahcich0: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 461 serr 00000000 cmd 00000017
(aprobe1:ahcich0:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 46 00
(aprobe1:ahcich0:0:0:0): CAM status: Command timeout
(aprobe1:ahcich0:0:0:0): Error 5, Retries exhausted
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST380011A 3.06> ATA-6 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <WDC WD20EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus4 target 0 lun 0
ada2: <WDC WD20EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus5 target 0 lun 0
ada3: <WDC WD30EZRX-00DC0B0 80.00A80> ATA-9 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
Timecounter "TSC" frequency 2700062790 Hz quality 1000
GEOM: ada1: corrupt or invalid GPT detected.
GEOM: ada1: GPT rejected -- may not be recoverable.
Trying to mount root from ufs:/dev/ufsid/52c28abb534aea39 [rw]...
GEOM_RAID5: registered shutdown event handler.
GEOM_RAID5: raid: device created (stripesize=131072).
GEOM_RAID5: raid: ada2(2): newest disk data (CALM): 0.
GEOM_RAID5: raid: ada2(2): disk attached.
GEOM_RAID5: raid: ada1(1): newest disk data (CALM): 0.
GEOM_RAID5: raid: ada1(1): disk attached.
GEOM_RAID5: raid: activated (forced).
GEOM_RAID5: raid: first write at 0.00% (cause: store verify progress).
ahcich1: Timeout on slot 0 port 0
ahcich1: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd c0 serr 00000000 cmd 00008017
Gracias por de antemano
